Brother MFC-J6710DW - Making N in 1 Copies or a Poster

Making copies
33
7
Making N in 1 copies or a
poster (Page Layout) 7
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
The 1 to 2 feature copies one A3 or Ledger
size page onto two A4 or Letter size pages. If
you use this setting, use the scanner glass.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
IMPORTANT
• Make sure the paper size is set to A4, A3,
Letter or Ledger.
• If you are producing multiple colour
copies, N in 1 copy is not available.
• (P) means Portrait and (L) means
Landscape.
• You can only make one poster copy and 1
to 2 copy at a time.
• Poster copy is not available when using
transparencies.
Note
• Watermark Copy, Book Copy, Sort,
Thin Paper Copy, Ink Save Mode
and Enlarge/Reduce are not available
with Page Layout.
• Skew Adjustment is not available with
Poster and 1 to 2 copy.
• Duplex Copy is not available with Poster
copy.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Page Layout.
e Press d or c to choose Off(1 in 1),
2in1(P), 2in1(L),
4in1(P), 4in1(L), 1to2,
Poster(2 x 1), Poster(2 x 2),
Poster(3 x 3) or 2 in 1 (ID)
1
.
Press OK.
1
For details about 2 in 1 (ID), see 2 in 1 ID Copy
on page 35.
If you chose 2in1 or
Poster(2 x 2)with A3 or Ledger, go
to step f to choose the paper size of
your document.
If you choose another setting, go to
step g.
f Do one of the following:
 If you chose 2in1(P) or
2in1(L), press a or b to choose
Layout Format. Press d or c to
choose LGRx2 i LGRx1,
LTRx2 i LGRx1, A3x2 i A3x1 or
A4x2 i A3x1.
 If you chose Poster(2 x 2),
press a or b to choose
Layout Format. Press d or c to
choose LGRx1 i LGRx4,
LTRx1 i LGRx4, A3x1 i A3x4 or
A4x1 i A3x4.
g If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the document and starts printing.
If you are using the scanner glass, go
to step h.
h After the machine scans the page,
press 1 to scan the next page.
i Place the next page on the scanner
glass.
Press OK.