Brother MFC-J6710DW - 3 Loading Documents; How to Load Documents; Using the ADF

29
3
3
How to load
documents
3
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF 3
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard
80 g/m
2
paper and always fan the pages
before putting them in the ADF.
Document Sizes Supported 3
Recommended Paper: 80 g/m
2
A4
How to load documents 3
IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents written with ink are
completely dry.
a Unfold the ADF Document Support (1)
and the ADF Document Output Support
Flap (2).
b Fan the pages well.
c Adjust the paper guides (1) to fit the
width of your documents.
d Place your documents, face up, top
edge first in the ADF until you feel them
touch the feed rollers.
IMPORTANT
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Loading documents 3
Length:
148 to 431.8 mm
Width: 148 to 297 mm
Weight:
64 to 90 g/m
2
1
2
1