Brother MFC-J6710DW - Adjusting Density; Ink Save Mode; Sorting Copies Using the ADF

Chapter 7
36
Sorting copies using the ADF7
You can sort multiple copies. Pages will be
stacked in the order 321, 321, 321, and so on.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Stack/Sort.
e Press d or c to choose Sort.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Fit to Page, Page Layout and
Book Copy are not available with Sort.
Adjusting Density 7
You can adjust the copy density to make
copies darker or lighter.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Density.
e Press d or c to make a lighter or darker
copy.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Ink Save Mode 7
Ink Save Mode can help you save ink. The
machine prints the colours lighter and
emphasises the outlines of the images as
shown below:
The amount of ink saved will vary depending
on the document.
Ink Save Mode: Off
7
Ink Save Mode: On 7
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Advanced Settings.
Press OK.
e Press a or b to choose
Ink Save Mode.
f Press OK.