EasyManuals Logo

Brother MFC-J6730DW Product Safety Guide

Brother MFC-J6730DW
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as determined by the total RENs,
contact the local telephone company. For products approved after July 23, 2001, the REN for this
product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 06 is a REN of 0.6). For earlier
products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens the telephone company will
provide advance notice in order for you to make necessary modifications to maintain uninterrupted
service.
If trouble is experienced with this equipment, for repair or warranty information, please contact
Brother Customer Service. (See Basic User’s Guide: Brother Numbers) If the equipment is
causing harm to the telephone network, the telephone company may request that you disconnect
the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, call your telephone company or a qualified installer.
If you are not able to solve a problem with your product, call Brother Customer Service.
(See Basic User’s Guide: Brother Numbers)
WARNING
For protection against the risk of electrical shock, always disconnect all cables from the wall
outlet before servicing, modifying or installing the equipment.
IMPORTANT
This equipment may not be used on coin service lines provided by the telephone company or
connected to party lines.
Brother cannot accept any financial or other responsibilities that may be the result of your use
of this information, including direct, special or consequential damages. There are no
warranties extended or granted by this document.
This product has been certified to comply with FCC standards, which are applied to the USA
only.

Other manuals for Brother MFC-J6730DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J6730DW and is the answer not in the manual?

Brother MFC-J6730DW Specifications

General IconGeneral
Duplex printingYes
Print technologyInkjet
Maximum resolution4800 x 1200 DPI
Duplex printing modeAuto
Print speed (black, normal quality, A4/US Letter)22 ppm
Print speed (color, normal quality, A4/US Letter)20 ppm
Copier resize25 - 400 %
Maximum number of copies99 copies
Scanner typeADF scanner
Maximum scan area295 x 429.8 mm
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution- DPI
Optical scanning resolution (black)600 x 600 ppi
Optical scanning resolution (color)600 x 300 ppi
FaxingColor faxing
Fax memory200 pages
Modem speed33.6 Kbit/s
Fax forwarding toPC
Fax speed dialing (max numbers)100
Digital sender-
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle- pages per month
DisplayLCD
Control typeTouch
Product colorBlack
Market positioningHome & office
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity100 sheets
Maximum input capacity501 sheets
Auto document feeder (ADF) input capacity50 sheets
Envelopes sizesC5, Com-10, DL, Monarch
Paper tray media typesGlossy paper, Plain paper, Recycled paper
Non-ISO print media sizesFolio (media size), Ledger (media size), Legal (media size), Letter (media size)
ISO A-series sizes (A0...A9)A3, A4, A5, A6
ISO B-series sizes (B0...B9)B4, B5, B6
Photo paper sizes (imperial)9x13, 10x15, 13x18 \
Maximum ISO A-series paper sizeA4
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithms64-bit WEP, 128-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-AES, WPA2-PSK, WPA2-TKIP
Ethernet LAN data rates10, 100 Mbit/s
Internal memory128 MB
Standard interfacesEthernet, USB 2.0
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.04 W
Power consumption (ready)6 W
Power consumption (sleep)1.6 W
Power consumption (copying)28 W
Power consumption (average operating)- W
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.9 Mavericks
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista
Weight and Dimensions IconWeight and Dimensions
Depth477 mm
Width575 mm
Height374 mm

Related product manuals