Confidential
1.12 Updating of paper feeding correction values (Maintenance mode 58 /
User menu)............................................................................................................4-7
1.13 Adjustment of margins in borderless printing (Maintenance mode 66) .................4-7
1.14 Reset purge and flushing counts...........................................................................4-7
1.15 < Paper remaining sensor model only > Disable inter-machine variation calibration
for paper remaining sensor (Maintenance mode 88 <Selector 1 on AMS04>) .....4-8
1.16 Write head calibration data (Maintenance mode 02).............................................4-8
1.17 Check scanning and printing.................................................................................4-8
2 IF YOU REPLACE THE HEAD/CARRIAGE UNIT.........................................................4-9
2.1 Update the head property information (Maintenance mode 68)..........................4-10
2.2 Perform ink supply purge (Maintenance mode 76)..............................................4-11
2.3 Check head nozzles (Maintenance mode 09).....................................................4-11
2.4 Adjust head inclination.........................................................................................4-11
2.5 Adjustment of software correction for inclination/corrugation/ruled lines
(Maintenance mode 65 / User menu)..................................................................4-12
2.6 Updating of paper feeding correction values (Maintenance mode 58 /
User menu)..........................................................................................................4-13
2.7 Adjustment of margins in borderless printing (Maintenance mode 66) ...............4-13
2.8 Write head calibration data (Maintenance mode 02)...........................................4-13
2.9 Check printing......................................................................................................4-13
2.10 Obtain machine information at the user site (Instruction to the end user)...........4-13
3 IF YOU REPLACE THE DOCUMENT SCANNER UNIT, ADF UNIT OR CIS UNIT....4-14
3.1 Set the CIS type (Maintenance mode 59) (Not required after replacement of the
ADF unit on simplex scanning models)...............................................................4-14
3.2 Acquire white/black level data (Maintenance mode 55) (Not required after
replacement of the ADF unit on simplex scanning models) ................................4-14
3.3 Check scanning...................................................................................................4-14
4 IF YOU REPLACE THE CONTROL PANEL ASSY.....................................................4-15
4.1 Adjust the touch panel (Maintenance mode 78)..................................................4-15
4.2 Check LCD operation (Maintenance mode 12)...................................................4-15
4.3 Check the operation of the control panel keys (Maintenance mode 13) .............4-15
5 IF YOU REPLACE THE INK ABSORBER BOX OR FLUSHING BOX .......................4-15
5.1 Reset purge or flushing counts............................................................................4-15
6 IF YOU REPLACE THE PAPER FEEDING RELATED PARTS AND
MAINTENANCE UNIT..................................................................................................4-16
6.1 Check head nozzles (Maintenance mode 09).....................................................4-17
6.2 Adjustment of software correction for inclination/corrugation/ruled lines
(Maintenance mode 65 / User menu)..................................................................4-17
6.3 Updating of paper feeding correction values (Maintenance mode 58 /
User menu)..........................................................................................................4-17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
