Home > Routine Maintenance > Clean Your Brother Machine > Clean the Machine's Printer Platen
Clean the Machine's Printer Platen
WARNING
Be sure to unplug the machine from the AC power outlet before cleaning the printer platen to avoid an
electrical shock.
1. Using both hands, use the finger holds on each side of the machine to lift the scanner cover into the open
position.
2. Clean the machine’s printer platen (1) and the area around it, wiping off scattered ink with a dry, soft lint-free
cloth.
IMPORTANT
DO NOT touch the encoder strip, the thin strip of plastic that stretches across the width of the machine
(2). Doing this may cause damage to the machine.
3. Gently close the scanner cover using both hands.
4. Reconnect the power cord.
Related Information
• Clean Your Brother Machine
Related Topics:
• Paper Handling and Printing Problems
604
To Next Page
Loading...
Need help?
General
