Brother MFC-L2700DN - Initial Setup

Initial Setup
Set the Date and Time
Related Models:
MFC-L2700DN/MFC-L2700DW
1
Press Menu.
2
Press a or b to display the [Initial
Setup] option, and then press OK.
3
Press a or b to display the
[Date&Time] option, and then press
OK.
4
Press a or b to display the
[Date&Time] option, and then press
OK.
5
Enter the last two digits of the year
using the dial pad, and then press OK.
6
Enter the two digits for the month using
the dial pad, and then press OK.
7
Enter the two digits for the day using the
dial pad, and then press OK.
8
Enter the time in the 24-hour format
using the dial pad, and then press OK.
9
Press Stop/Exit.
Adjust the Ring Volume
Related Models:
MFC-L2700DN/MFC-L2700DW
1
Press Menu.
2
Press a or b to display the [General
Setup] option, and then press OK.
3
Press a or b to display the [Volume]
option, and then press OK.
4
Press a or b to display the [Ring]
option, and then press OK.
5
Press a or b to display the [High],
[Med], [Low], or [Off] option, and
then press OK.
6
Press Stop/Exit.
Adjust the Beeper Volume
Related Models:
MFC-L2700DN/MFC-L2700DW
When the beeper is on, the machine will beep
when you press a button, make a mistake, or
after you send or receive a fax. You can
choose from a range of volume levels.
1
Press Menu.
2
Press a or b to display the [General
Setup] option, and then press OK.
3
Press a or b to display the [Volume]
option, and then press OK.
4
Press a or b to display the [Beeper]
option, and then press OK.
5
Press a or b to display the [High],
[Med], [Low], or [Off] option, and
then press OK.
6
Press Stop/Exit.
Adjust the Speaker Volume
Related Models:
MFC-L2700DN/MFC-L2700DW
1
Press Menu.
1
General Information
9