To Next PageTo Next PageHow to resolve 'Manual Feed' message on Brother MFC-L2701DW Printer?
The 'Manual Feed' message on your Brother printer indicates that 'Manual' was selected as the paper source in the printer driver when there was no paper in the manual feed slot. Place paper in the manual feed slot.
How to fix 'Size mismatch' error on Brother Printer?
If your Brother printer displays a 'Size mismatch' error, it means the paper in the tray is not the correct size. Load the correct size of paper in the tray and set the size of paper to the tray.
When to replace drum in Brother MFC-L2701DW Printer?
The message 'Replace Drum' on your Brother printer indicates that it is time to replace the drum unit. Also, this message can appear if the drum unit counter was not reset when a new drum was installed, so you should reset the drum unit counter. See the instructions included with the new drum unit.
What to do if my Brother MFC-L2701DW has a 'Document Jam' error?
If your Brother printer displays a 'Document Jam' error, it means the document was not inserted or fed correctly, or the document scanned from the ADF was too long. Remove the jammed paper from the ADF unit.
What does 'Drum !' mean on my Brother Printer and how to fix it?
The 'Drum !' message on your Brother printer indicates that the corona wire on the drum unit must be cleaned or the drum unit or the toner cartridge and drum unit assembly is not installed correctly. Clean the corona wire on the drum unit. Also put the toner cartridge in the drum unit. Then reinstall the toner cartridge and drum unit assembly in the machine.
What does 'Toner Low' mean on my Brother MFC-L2701DW Printer?
If the LCD of your Brother printer displays the message 'Toner Low', you can still print. However, the toner cartridge is near the end of its life. It is recommended to order a new toner cartridge now so you have it ready when the LCD displays 'Replace Toner'.
How to clear 'Jam Rear' error on Brother MFC-L2701DW?
If your Brother printer displays a 'Jam Rear' error, open the fuser cover and remove the jammed paper. Then, close the fuser cover. If the error message remains, press Start.
What to do if my Brother MFC-L2701DW Printer says 'No Toner'?
If your Brother printer displays 'No Toner', it means that the toner cartridge is either not installed or not installed correctly. Remove the drum unit and toner cartridge assembly. Install the toner cartridge in the drum unit correctly, and then reinstall the toner cartridge and drum unit assembly in the machine. If the problem continues, replace the toner cartridge.
What to do if Brother MFC-L2701DW Printer shows 'Cartridge Error Put the Toner Cartridge back in'?
If your Brother printer displays 'Cartridge Error Put the Toner Cartridge back in', it means the toner cartridge is not installed correctly. Remove the toner cartridge and drum unit assembly, take out the toner cartridge, and put it back in the drum unit again. Reinstall the toner cartridge and drum unit assembly in the machine.
How to fix 'Jam Tray' error on Brother MFC-L2701DW Printer?
If your Brother printer shows a 'Jam Tray' error, pull the paper tray out completely and remove the jammed paper. Then, put the paper tray firmly back into the machine.
General| Printer Type | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | Up to 2400 x 600 dpi |
| Automatic Duplex Printing | Yes |
| Connectivity | USB, Ethernet, Wi-Fi |
| Paper Input Capacity | 250 sheets |
| ADF Capacity | 35 sheets |
| Monthly Duty Cycle | Up to 10, 000 pages |
| Maximum Copy Resolution | Up to 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Processor Speed | 266 MHz |
| Memory | 64 MB |
| Maximum Paper Size | A4 |
| Dimensions | 409 x 398.5 x 316.5 mm |
| Print Speed | 30 ppm |
| Copy Speed | 30 cpm |
| Scanner Type | Flatbed, ADF |
| Mobile Printing | Brother iPrint&Scan, Google Cloud Print, Apple AirPrint |
Explains the layout and functions of the printer's control panel buttons and displays.
Guide to launching Brother's utility applications for enhanced machine functionality.
Steps to perform the initial setup of the machine, including date, time, and volume settings.
Instructions for loading paper correctly into the paper tray for printing.
How to configure the machine to check paper size automatically when the tray is inserted.
Procedures for updating the machine's paper size setting to match loaded paper.
Steps to set the paper type in the machine for optimal print quality.
Guidelines and warnings for using special types of paper with the machine.
Instructions for sending print jobs from a Windows computer to the Brother machine.
How to perform automatic duplex printing from a Windows computer.
Guide to printing multiple document pages onto a single sheet of paper.
Instructions for printing on various media types like envelopes and labels using the manual feed slot.
How to print single sheets of various paper types using the manual feed slot.
Step-by-step guide to making copies of documents using the machine's scanner or ADF.
Details on adjusting copy settings like quality, brightness, contrast, and enlargement.
How to perform 2-sided copying for multiple pages using different layout options.
Specific steps for 2-sided copying when using the scanner glass.
How to use the 2-in-1 (ID) Copy feature to copy both sides of an ID onto one page.
Instructions for scanning documents and photos from a computer using Brother software.
Guide to saving scanned files as PDFs using the ControlCenter4 application.
How to initiate scans directly from the machine's control panel buttons.
Procedure for setting the machine's identification (name and fax number) for outgoing faxes.
How to adjust compatibility settings to improve fax transmission over different phone lines.
Explanation of different modes for receiving faxes automatically or manually.
A guide to selecting the appropriate fax receive mode based on line setup.
Setting the duration of the fast double-ring alert for voice calls in Fax/Tel mode.
Configuring the number of rings before the machine automatically answers incoming calls.
How to save frequently used fax numbers for quick dialing.
Instructions for storing up to 200 numbers with codes for speed dialing.
Procedures for editing or removing stored One Touch dial numbers.
Methods for modifying or deleting stored Speed Dial entries.
Information on connecting and using voice mail, VoIP, and external answering devices.
Step-by-step instructions for sending a fax from the machine.
Guidance on sending and receiving faxes directly from a computer using PC-FAX software.
Initial checks and steps to identify the cause of machine issues.
Explains common error messages and their corresponding causes and actions.
Steps to find and clear different types of document and paper jams within the machine.
Instructions for entering text and characters using the machine's control panel.
Information on replacement toner cartridges and drum units for the machine.
