Brother MFC-L5705DW User Manual

Home > Routine Maintenance > Clean the Machine > Clean the Drum Unit
Clean the Drum Unit
If your printout has dots or other repeating marks at 3.7 in. (94 mm) intervals, the drum may have foreign
material, such as glue from a label, stuck on the drum surface.
1. Make sure the machine is in Ready Mode.
2. Press
[Settings] > [All Settings] > [Print Reports] > [Drum Dot Print].
3. Press [Yes].
The machine prints the Drum Dot Check Sheet.
4. Press
.
5. Press and hold
to turn off the machine.
6. Open the front cover.
7. Remove the toner cartridge and drum unit assembly from the machine.
8. Push down the green lock lever and take the toner cartridge out of the drum unit.
590

Brother MFC-L5705DW Specifications

General

Print Technology	Laser
Functionality	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Paper Capacity	250 sheets
Monthly Duty Cycle	50, 000 pages
Connectivity	USB, Ethernet, Wi-Fi
Display	2.7-inch Color Touchscreen
Scan Resolution	1200 x 1200 dpi
Automatic Document Feeder (ADF)	Yes
ADF Capacity	50 sheets
Processor	600 MHz
Memory	512 MB
Fax Transmission Speed	33.6 kbps
Mobile Printing	AirPrint, Google Cloud Print, Brother iPrint&Scan
Toner Yield	3, 000 pages
Maximum Paper Size	8.5" x 14" (Legal)