How to fix 'Jam Inside' error on Brother All in One Printer?
If your Brother All in One Printer displays 'Jam Inside', the paper is jammed inside the machine. To resolve this, open the front cover, remove the toner cartridge and drum unit assembly, and pull out all jammed paper. Finally, close the front cover.
What to do if my Brother MFC-L6750DW says 'No Paper'?
If your Brother All in One Printer shows 'No Paper', it means the machine is out of paper, or paper is not loaded correctly in the paper tray. Refill paper in the paper tray and make sure the paper guides are set to the correct size.
What causes 'No Toner' error on Brother All in One Printer and how to fix it?
If your Brother All in One Printer displays 'No Toner', the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine. If the problem continues, replace the toner cartridge with a new one.
How to clear 'Document Jam' on Brother MFC-L6750DW All in One Printer?
If your Brother All in One Printer displays 'Document Jam', the document was not inserted or fed correctly, or the document scanned from the ADF was too long. Remove the jammed paper from the ADF unit. Clear any debris or scraps of paper from the ADF unit paper path.
What does 'Drum !' mean on my Brother All in One Printer and how do I fix it?
If your Brother All in One Printer shows 'Drum !', it could be due to the corona wire on the drum unit needing cleaning or the drum unit not being installed correctly. Clean the corona wire on the drum unit. Remove the drum unit, remove the toner cartridge from the drum unit, and put the toner cartridge back into the drum unit. Reinstall the drum unit in the machine.
How do I resolve a 'Jam Rear' error on my Brother All in One Printer?
If your Brother All in One Printer displays 'Jam Rear', the paper is jammed in the back of the machine. Open the fuser cover and remove all jammed paper. Close the fuser cover.
What should I do if my Brother All in One Printer says 'Jam MP Tray'?
If your Brother All in One Printer indicates 'Jam MP Tray', the paper is jammed in the MP tray. Remove all jammed paper from in and around the MP tray. Press Retry.
What to do if Brother All in One Printer says 'No Drum Unit'?
If your Brother All in One Printer shows 'No Drum Unit', the drum unit is not installed correctly. Reinstall the toner cartridge and drum unit assembly.
How to fix 'Jam 2-sided' error on Brother MFC-L6750DW All in One Printer?
If your Brother All in One Printer displays 'Jam 2-sided', the paper is jammed in the 2-sided tray or inside the back cover. Remove the 2-sided tray and open the back cover to pull out all jammed paper.
What does 'Supplies Replace Drum' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Supplies Replace Drum', it is time to replace the drum unit with a new one.
General| Type | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 50, 000 pages |
| Duplex Printing | Yes |
| Memory | 512 MB |
| Processor | 800 MHz |
| Fax Speed | 33.6 Kbps |
| Paper Capacity | 250-sheet |
| Supported Media Sizes | Letter, Legal, A4, A5, A6 |
| Connectivity | USB, Ethernet, Wi-Fi |
| Mobile Printing | Apple AirPrint, Google Cloud Print, Brother iPrint&Scan |
| Scan Resolution | Up to 1200 x 1200 dpi |
| Toner Yield | Approx. 3, 000 pages (Standard) |
To Next Page