Troubleshooting
113
B
Transferring your faxes or Fax
Journal report B
If the Touchscreen displays:
Print Unable XX
Scan Unable
We recommend transferring your faxes to
another fax machine or to your computer
(see Transferring faxes to another fax
machine on page 113 or Transferring faxes
to your computer on page 114).
You can also transfer the Fax Journal report
to see if there are any faxes you must transfer
(see Transferring the Fax Journal report to
another fax machine on page 114).
If there is an error message on the
Touchscreen after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode (see Set your
Station ID on page 19).
a Press to interrupt the error
temporarily.
b Press .
c Press All Settings.
d Swipe up or down, or press a or b to
display Service.
e Press Service.
f Press Data Transfer.
g Press Fax Transfer.
h Do one of the following:
If the Touchscreen displays No
Data, there are no faxes left in the
machine’s memory. Press Close.
Enter the fax number to which faxes
will be forwarded.
i Press Fax Start.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
