Brother MFC-L8600CDW - Volume Settings; Ring Volume; Beeper Volume; Speaker Volume

General information
21
1
Volume settings 1
Ring volume 1
You can choose from a range of ring volume
levels.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Volume.
f Press Volume.
g Press Ring.
h Press Off, Low, Med or High.
i Press .
Beeper volume 1
When the beeper is on, the machine will beep
when you press a button, make a mistake, or
after you send or receive a fax. You can
choose from a range of volume levels.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Volume.
f Press Volume.
g Press Beep.
h Press Off, Low, Med or High.
i Press .
Speaker volume 1
You can choose from a range of speaker
volume levels.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Volume.
f Press Volume.
g Press Speaker.
h Press Off, Low, Med or High.
i Press .