Brother Network - WINS Server

Control panel setup
24
3
d Press a or b to choose WINS Config.
Press OK.
e Press a or b to choose Auto or Static.
Press OK.
f Press Stop/Exit.
Auto
3
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
3
Uses a specified IP address for the primary and secondary WINS servers.
WINS Server 3
Primary WINS Server IP Address 3
This field specifies the IP address of the primary WINS (Windows
®
Internet Name Service) server. If set to a
non-zero value, the machine will contact this server to register its name with the Windows
®
Internet Name
Service.
Secondary WINS Server IP Address
3
This field specifies the IP address of the secondary WINS server. It is used as a backup to the Primary WINS
server address. If the Primary server is unavailable, the machine still can register itself with a secondary
server. If set to a non-zero value, the machine will contact this server to register its name with the Windows
®
Internet Name Service. If you have a primary WINS server, but no secondary WINS server, simply leave this
field blank.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose TCP/IP.
Press OK.
d Press a or b to choose WINS Server.
Press OK.
e Press a or b to choose Primary or Secondary.
Press OK.
f Enter the WINS Server address using the dial pad. (To enter numbers and text, see Entering Text
on page 138.)
Press OK.
g Press Stop/Exit.