Brother Network - Restoring the network settings to factory default; Printing the Network Configuration List

Control panel setup
38
3
3
Relay Report
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section
of the Relay function settings.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Relay.
Press OK.
e Press a or b to choose Relay Report.
Press OK.
f Press a or b to choose On or Off.
Press OK.
g Press Stop/Exit.
Note
For more information on Relay Broadcast, see Relay broadcast from a computer on page 82.