INTRODUCTION
4
Safety Precautions
Do not use a damaged or leaking
battery as the fluid may get on your
hands.
Do not use a deformed or leaking
battery or one whose label is
damaged. There is a possibility of it
generating heat.
Do not touch metal parts around
the print head immediately after
printing.
When the P-touch is not being
used, store it out of the reach of
children. In addition, do not allow
children to put any P-touch parts or
labels in their mouths. If any object
has been swallowed, seek medical
attention.
Do not use a damaged adapter
cord or power plug.
Do not use the P-touch if a foreign
object enters the P-touch. If any
foreign object enters the P-touch,
disconnect the AC adapter and
remove the batteries, and contact
Brother customer service.
CAUTION
Follow these guidelines to avoid personal injury, liquid leakage, burns or heat.
Do not touch the cutter blade.
If leaked fluid from batteries gets on
your skin or clothes, immediately
rinse them with clean water.
Remove the batteries and
disconnect the AC adapter if you do
not intend to use the P-touch.
Do not use a battery other than that
specified. Do not use combinations
of old and new batteries or
combinations of different types,
different charging levels, different
manufacturers or different models.
Do not insert a battery with the
polarity (+ and -) reversed.
Do not drop or hit the P-touch/AC
adapter.
Do not press on the LCD display.
Do not put your finger inside the
P-touch when you close the tape
compartment cover or battery
compartment cover.
Before using Ni-MH rechargeable
batteries, carefully read the
instructions for the batteries and
battery charger, and be sure to use
them correctly.
When using Ni-MH rechargeable
batteries, charge the batteries with
a specialized battery charger
before using the batteries.
WARNING
To Next Page
Loading...
Need help?
General
