How to fix Brother P-Touch PT-D450 when the label is not printed correctly?
Remove the tape cassette and reinstall it, pressing firmly until it clicks into place. If the print head is dirty, clean it with a cotton swab or an optional print head cleaning cassette (TZe-CL4).
Why does my Brother P-Touch PT-D450 stop while printing?
If you see striped tape, it means you've reached the end of the tape, so replace the tape cassette. Alternatively, replace all batteries or connect the AC adapter directly to the Brother P-touch labeler.
What to do if my Brother P-Touch PT-D450 Label Maker is not printing?
First, ensure that you have entered text. Then, check that the tape cassette is correctly installed and contains sufficient tape. If the tape is bent, cut off the bent section and thread the tape through the tape exit slot. If the tape is jammed, remove the tape cassette, pull out the jammed tape, and cut it. Finally, make sure the end of the tape passes through the tape guide before reinstalling the tape cassette.
Why is the display blank on my Brother P-Touch PT-D450?
Check that the batteries are correctly installed and that the AC adapter, designed exclusively for your Brother P-touch labeler, is correctly connected. Also, verify that the rechargeable battery is fully charged.
What to do if my Brother P-Touch PT-D450 Label Maker screen locks up?
Reset the internal memory to the initial settings. If resetting the Brother P-touch labeler doesn't solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if the ink ribbon is separated from the ink roller in Brother P-Touch PT-D450?
If the ink ribbon is broken, replace the tape cassette. If the ink ribbon is not broken, leave the tape uncut, remove the tape cassette, and wind the loose ink ribbon onto the spool.
Why are my saved label files empty on my Brother Label Maker?
All files saved in the internal memory are deleted if the batteries are weak or the AC adapter was disconnected.
What does 'Text Too Long!' mean on a Brother P-Touch PT-D450?
The 'Text Too Long!' message means that the length of the label to be printed using the text entered is longer than the length setting. Edit the text to fit within the set length, or change the length setting.
What does 'Label Too Long!' mean on a Brother P-Touch PT-D450 Label Maker?
The message 'Label Too Long!' indicates that the length of the label to be printed using the text entered is longer than 39.37" (1 m). Edit the text so that the length of the label is less than 39.37" (1 m).
What does 'Cutter Malfunction!' mean on a Brother P-Touch PT-D450 Label Maker?
The 'Cutter Malfunction!' message means that the tape cutter was closed when you tried to print or feed tape. Turn the Brother P-touch labeler off and then on again before continuing. If tape is tangled in the cutter, remove the tape.
Regulatory compliance statement for USA concerning FCC rules and interference.
Statement regarding the product's adherence to ENERGY STAR guidelines for energy efficiency.
Information about manual compilation, potential discrepancies with software updates, and trademark notices.
Lists items included in the package and instructions for initial unpacking.
Detailed overview of the labeler's screen and keyboard, identifying key functions.
Guidance on using the AC adapter and installing batteries for the P-touch labeler.
Steps to power the device on and off, including information on the auto power-off feature.
Procedure for configuring initial language and measurement unit (inch/mm) settings.
Instructions for feeding the tape through the labeler.
Instructions for adjusting the LCD contrast for better visibility.
Details on how to set the LCD backlight, including auto-off features.
Basic steps for creating labels directly on the P-touch labeler, including text and formatting.
Guide to connecting the labeler to a computer and using P-touch Editor software for advanced label design.
Detailed instructions for inputting, modifying, and deleting text, including line and block management.
How to use tab stops for alignment and adjust tab length for text.
Instructions for using the text reminder feature for faster text entry.
Steps to clear text reminder memory.
Options to enable or disable the text reminder function.
Guide to accessing and inserting various symbols, punctuation, and mathematical characters.
Instructions for typing characters with diacritical marks or accents.
How to adjust font, size, width, style, line, and alignment for text on labels.
Features for automatically adjusting text size to fit within the label length.
How to apply decorative frames to labels from a selection.
Configuring label length, cut options, and tab length for customized label output.
Utilizing pre-defined layouts from templates for efficient label creation.
Selecting and using pre-defined block layouts for structured label design.
Steps to generate bar codes, set parameters, and enter data for bar code labels.
Functionality to review label layout and content before initiating the print process.
Basic instructions for printing labels, including cutting the tape.
Setting the number of copies for label printing jobs.
Options for sequential numbering of labels.
Option for mirror printing for transparent applications.
Customizing margins and cut settings for different label printing scenarios.
Procedure for fine-tuning the printed label length for accuracy.
How to print pre-stored labels from the device's label collection.
Instructions on how to download additional label categories using P-touch Update Software.
Steps to save, print, open, and delete labels stored in the labeler's memory.
Methods to reset the labeler to factory default or clear specific data and settings.
Procedures for cleaning the unit, print head, and tape cutter to ensure optimal performance.
A guide to diagnosing and resolving typical issues encountered with the P-touch labeler.
Explanation of common error messages and steps to correct them.
Technical specifications of the P-touch labeler, including dimensions, power, and tape compatibility.
Information on the operating systems and hardware required for using the P-touch Editor software.
General| Model | PT-D450 |
|---|---|
| Device Category | Label Maker |
| Print Method | Thermal Transfer |
| Print Resolution | 180 dpi |
| Print Speed | 20 mm/sec |
| Tape Type | TZe |
| Display | LCD |
| Keyboard | QWERTY |
| Connectivity | USB |
| Cutter | Automatic |
| Tape Sizes | 6 mm, 9 mm, 12 mm, 18 mm |
| Power | AC adapter |
To Next Page