What to do if my Brother Label Maker is not printing correctly?
If your Brother Label Maker is not printing or the printed characters are blurred, make sure that the tape cassette has been inserted properly. If the tape cassette is empty, replace it. Also, verify that the character size is appropriate for the width of the tape you are using.
What to do if my Brother P-touch Extra PT-300 tape cannot be cut?
If the tape on your Brother Label Maker cannot be cut, the cutting blade is probably dull. Replace the cutter unit.
Why does my Brother Label Maker display stay blank?
If the display of your Brother Label Maker stays blank after turning it on, try the following: First, check the polarity of the batteries. If the batteries are low, replace them. Also, ensure that the adapter is working correctly.
Why does striped tape appear on my Brother P-touch Extra PT-300?
Striped tape appears when you have reached the end of the tape. Replace it with a new tape.
Why are the printed characters not formed properly on my Brother P-touch Extra PT-300?
If the printed characters are not formed properly on your Brother Label Maker, the batteries are probably weak. Replace them.
Why has the memory cleared on my Brother P-touch Extra PT-300 Label Maker?
If the memory has cleared on its own on your Brother Label Maker, the batteries are probably weak. Replace them.
What to do if an unprinted line appears on a label from my Brother Label Maker?
If an unprinted line appears on a label from your Brother Label Maker, there may be some dust on the print head. Wipe the print head gently with a dry cotton swab. If dust still remains, dip the cotton swab in isopropyl (rubbing) alcohol and wipe the print head again.
General| Type | Label Maker |
|---|---|
| Model | PT-300 |
| Brand | Brother |
| Series | P-touch Extra |
| Keyboard | QWERTY |
| Print Method | Thermal Transfer |
| Maximum Label Width | 12mm |
| Print Speed | 10mm/sec |
| Tape Size | 9mm, 12mm |
| Display | LCD |
| Power Source | AC Adapter |
Important safety and usage guidelines for operating the machine and handling supplies.
Step-by-step instructions for loading a new tape cartridge into the machine.
Options for selecting character sizes: Standard, Double Width, Double Height, and combinations.
The final step to print the created label after setting size, style, and tape feed.
To Next Page