Brother P-touch PT-E105 User Manual

ELECTRONIC LABELING SYSTEM
01
GETTING STARTED
Installing Power Supply and Tape Cassette
With the LCD facing down, open the Cassette
Cover by pressing the grooved tab and
pushing in the direction of the arrow, as
illustrated.
When replacing batteries or tape cassettes,
make sure the power is turned off.
This P-touch labeling system requires six (6)
AAA alkaline batteries or six (6) fully-charged
Ni-MH batteries, not included.
NOTE
This P-touch labeling system requires one of the
following (not included):
- six (6) AAA alkaline batteries,
- six (6) fully-charged Ni-MH batteries,
- AC Adapter (AD24).
1
Print Head
Tape Cutter LeverCassette Cover
1
2
Thank you for purchasing a Brother P-touch labeling system!
Use your new Brother P-touch labeling system to create a wide variety of custom, self-adhesive labels.
This P-touch labeling system uses Brother TZe tapes. TZe tape cassettes are available in many colors and sizes. For a complete list of
tapes compatible with your P-touch labeling system, visit us at: www.brother.com
.
Please read this guide, and the included Product Safety Guide, before using this P-touch labeling system. After reading this guide, keep
it in a safe place.
English
User’s Guide
E105

Brother P-touch PT-E105 Specifications

General

Device Category	Label Maker
Display	LCD
Print Method	Thermal transfer
Print Resolution	180 dpi
Print Speed	20 mm/sec
Maximum Label Width	12mm
Tape Type	TZe tape
Cutter	Manual
Number of Fonts	1
Multi-Block Printing	No
Mirror Printing	Yes
Vertical Printing	Yes
Auto Numbering	Yes
Barcodes	Yes
Label Width	3.5, 6, 9, 12mm
Max. Label Length	1 m
Tape Sizes	6mm, 9mm, 12mm
Power Source	6 x AAA batteries or AC adapter
Font Styles	Normal, Bold, Italic, Outline, Shadow
Number of Symbols	200