Why does my Brother P-touch E110 say 'Battery Low!'?
The Brother Label Maker displays 'Battery Low!' because the batteries are weak. If you're using AAA alkaline batteries, replace them with a fresh set (avoid mixing old and new batteries). If you're using Ni-MH batteries, ensure they are fully charged.
What to do if my Brother P-touch E110 says '2 Line Limit! / 1 Line Limit!'?
The Brother Label Maker displays '2 Line Limit! / 1 Line Limit!' because you're trying to print or preview two lines of text while using 3.5 mm or 6 mm tape, or you tried to enter a third line. Install a larger tape size to resolve this.
How to fix 'Text Limit! Change Length' on Brother Label Maker?
The Brother Label Maker displays 'Text Limit! Change Length' because you may have exceeded the set tape length. Try reducing the amount of text or select [Auto] as the tape length.
Why does my Brother P-touch E110 Label Maker say 'Wrong Tape! Use TZe tape'?
The Brother Label Maker displays 'Wrong Tape! Use TZe tape' because the installed tape cassette is not correct. Ensure you are using a cassette with the mark or mark.
What does 'Text Full!' mean on my Brother P-touch E110 Label Maker?
The Brother Label Maker displays 'Text Full!' because you have reached the maximum number of characters allowed (80 characters for text).
What to do if my Brother Label Maker says 'Battery Empty!'?
The Brother Label Maker displays 'Battery Empty!' because the installed batteries are exhausted and need to be replaced.
Why does my Brother Label Maker say 'No Text!'?
The Brother Label Maker displays 'No Text!' because you tried to print a text file when there is no data stored in the memory, or you pressed a button when no text was entered, or you pressed a button when no text was entered while using templates.
What does 'Cutter Pressed' mean on my Brother P-touch E110?
The Brother Label Maker displays 'Cutter Pressed' because the Tape Cutter Lever was pressed in the middle of the printing process.
What does 'Feed OK?' mean on my Brother Label Maker?
The Brother Label Maker displays 'Feed OK?' because tape was fed after printing when [Chain Print] was selected. For more information, see the Setting Margins section.
Why does my Brother P-touch E110 display 'Invalid!'?
The Brother Label Maker displays 'Invalid!' because an invalid number was entered as the label length, tab length, cable diameter, flag length or faceplate length, or an invalid letter or number to be incremented was selected in the Serialize function.
General| Color | No |
|---|---|
| Text alignment | Center, Left |
| Printing colors | Black |
| Print technology | Thermal transfer |
| Maximum resolution | 180 x 180 DPI |
| Maximum print height | 9 mm |
| Maximum printing width | 12 mm |
| Battery type | AAA |
| Auto power off | Yes |
| Battery technology | Alkaline |
| AC adapter output current | 1.6 A |
| AC adapter output voltage | 9 V |
| Number of batteries supported | 6 |
| Tape type | HGe/TZe |
| Font styles | Helsinki |
| Number of styles | 9 |
| Number of characters | 200 |
| Display | LCD |
| Control type | Buttons |
| Product color | Black, Orange |
| Keyboard layout | QWERTY |
| Display number of lines | 1 lines |
| Display number of characters | 16 |
| Label memory | 9 label(s) |
| Languages support | CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, NOR, POL, POR, RUM, SLK, SLV, SWE, TUR |
| Number of languages | 20 |
| Lines quantity | 2 lines |
| Connectivity technology | - |
| Maximum label length | 0.3 m |
| Supported paper width | 3.5, 6, 9, 12 mm |
| Package depth | 279 mm |
| Package width | 314 mm |
| Package height | 116 mm |
| Cartridges quantity | 1 pc(s) |
| Harmonized System (HS) code | 84433210 |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 10 - 35 °C |
Weight and Dimensions| Depth | 58 mm |
|---|---|
| Width | 111 mm |
| Height | 204 mm |
Covers initial setup of power, battery insertion, and tape loading for the P-touch machine.
Guides through setting the device language and unit of measurement for operation.
Covers basic text entry, case switching, and creating two-line labels.
Provides instructions for printing labels and producing multiple copies.
Provides step-by-step instructions to reset the device to factory default settings.
Explains common error messages and provides solutions for the P-touch machine.
Offers solutions for common operational issues like blank displays or printing problems.
To Next Page