What to do if my Brother Label Maker says 'No Cassette!'?
If your Brother Label Maker displays 'No Cassette!', it means that a cassette is not installed. Install a cassette with the mark or mark.
Why does my Brother P-touch E110VP Label Maker say 'Battery Low!'?
The 'Battery Low!' message on your Brother Label Maker indicates that the batteries are weak. If you are using AAA alkaline batteries, replace them with a fresh set, avoiding mixing old and new batteries. If you're using Ni-MH batteries, ensure they are fully charged.
What to do if my Brother P-touch E110VP says 'Text Full!'?
The 'Text Full!' message on your Brother Label Maker means you've reached the maximum character limit, which is 80 characters for text. Try shortening the text you are trying to enter.
What does 'Battery Empty!' mean on my Brother P-touch E110VP and what should I do?
The 'Battery Empty!' message on your Brother Label Maker indicates that the installed batteries are exhausted. You need to replace them to continue using the device.
What does 'Invalid!' mean on my Brother P-touch E110VP Label Maker?
The 'Invalid!' message on your Brother Label Maker means that you entered an invalid number for label length, cable diameter, flag length, or faceplate length. Alternatively, it could mean an invalid letter or number was selected in the Serialize function.
Why does my Brother P-touch E110VP say 'No Text!'?
The 'No Text!' message appears on your Brother Label Maker because you attempted to print a text file with no data stored, or you pressed certain buttons when no text was entered, or you pressed certain buttons when no text was entered while using templates.
What to do if my Brother Label Maker says 'Text Limit! Change Length'?
If your Brother Label Maker displays 'Text Limit! Change Length', it means you've exceeded the set tape length. To resolve this, either shorten your text or set the tape length to [Auto].
Why does my Brother P-touch E110VP Label Maker say 'Wrong Tape! Use TZe tape'?
The 'Wrong Tape! Use TZe tape' message on your Brother Label Maker indicates that you need to use a cassette with the mark or mark.
Why does my Brother P-touch E110VP say '2 Line Limit! / 1 Line Limit!'?
The '2 Line Limit! / 1 Line Limit!' message on your Brother Label Maker means that you tried to enter a third line or attempted to print or preview two lines of text while using 3.5 mm or 6 mm tape. You should install a larger tape size.
What does 'Cutter Pressed' mean on my Brother P-touch E110VP Label Maker?
The 'Cutter Pressed' message on your Brother Label Maker indicates that the Tape Cutter Lever was pressed during the printing process.
Instructions for inserting batteries and tape cassettes into the P-touch labelling machine.
Configures the device's operating language and measurement units (mm/inch).
Guide to inputting characters, switching modes, and formatting text.
Instructions to restore the device to its factory default settings.
Lists common error messages and provides solutions or corrective actions.
General| Model | P-touch E110VP |
|---|---|
| Device Category | Label Maker |
| Print Method | Thermal transfer |
| Print Resolution | 180 dpi |
| Print Speed | 20 mm/sec |
| Label Width | up to 12 mm |
| Maximum Print Width | 12 mm |
| Max. Label Length | 1 m |
| Keyboard | QWERTY |
| Cutter | Manual |
| Batteries | 6 x AAA (not included) |
| Tape Width | 6 mm, 9 mm, 12 mm |
| Display | 1-line LCD |
| Connectivity | No |
| Power Source | AC adapter |
To Next Page