Brother P-touch E110 User Manual

 Preview
• Pressing the Preview key displays a preview
of the label, and may differ from the actual
label when printed.
• If the LCD cannot display all the text at once,
press / to display the hidden text.
• Press / / to exit Preview
mode.
 Feeding (Tape Feed)
• This function feeds approximately 25 mm
of blank tape.
• Do not pull uncut tape from the Tape Cassette
as this may damage the Tape Cassette.
 Printing
Press the Print key to print the text displayed on
the LCD.
 Printing Multiple Copies
• You can print up to nine copies of each label.
• DO NOT touch the Tape Cutter Lever while
the message [Please Wait] is displayed on
the LCD.
• To cut tape: When printing ends, push the
Tape Cutter Lever after the message
[Please Cut] appears.
• To remove tape backing, fold the tape
lengthwise (with the text facing inward), to
expose the inside edges that run down the
centre of the tape backing. Peel and apply.
 Setting Margins
[Full] / [Half] / [Narrow]
Use one of these options to customise margin
length before and after your text.
The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
[Chain Print] (tape-saving option)
Use this option to print multiple different labels
with narrow margins. This option saves tape.
1. Enter your text.
2. Press .
3. When [Feed OK?] appears on the LCD,
press to change the text.
4. Clear the text, enter the text you want on the
next label, and then press .
5. After your last label prints, when [Feed OK?]
appears on the LCD, press .
NOTE
• When you use [Chain Print], feed the tape
before using the cutter ( + ),
otherwise part of the text may be cut off.
• Do not pull the tape, as this may damage
the Tape Cassette.
• The printed dots (:) indicate the end of the
label. Cut along the printed dots (:) with
scissors.
Printing Labels
+
+ [Copies:] / /
-
/ [Margin] /
[Full / Half / Narrow / Chain Print]
LCD Printout
Full
Half
Narrow
67mm
ABC
41mm
ABC
25mm
ABC

Brother P-touch E110 Specifications

General

Color	No
Text alignment	Center, Left
Printing colors	Black
Print technology	Thermal transfer
Maximum resolution	180 x 180 DPI
Maximum print height	9 mm
Maximum printing width	12 mm
Battery type	AAA
Auto power off	Yes
Battery technology	Alkaline
AC adapter output current	1.6 A
AC adapter output voltage	9 V
Number of batteries supported	6
Tape type	HGe/TZe
Font styles	Helsinki
Number of styles	9
Number of characters	200
Display	LCD
Control type	Buttons
Product color	Black, Orange
Keyboard layout	QWERTY
Display number of lines	1 lines
Display number of characters	16
Label memory	9 label(s)
Languages support	CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, NOR, POL, POR, RUM, SLK, SLV, SWE, TUR
Number of languages	20
Lines quantity	2 lines
Connectivity technology	-
Maximum label length	0.3 m
Supported paper width	3.5, 6, 9, 12 mm
Package depth	279 mm
Package width	314 mm
Package height	116 mm
Cartridges quantity	1 pc(s)
Harmonized System (HS) code	84433210
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	10 - 35 °C

Weight and Dimensions

Depth	58 mm
Width	111 mm
Height	204 mm