15
INTRODUCTION
How to use the P-touch
Create a label by connecting your P-touch to a computer
GETTING STARTED
Your P-touch can be used as a stand alone handheld labeller,or it can be
connected to a PC or Mac and used with the included P-touch Editor software
to create more elaborate labels.
To use your P-touch connected to a computer, attach your P-touch to a
computer via the included USB cable and install the P-touch Editor software
and drivers.
CREATING A LABEL
LABEL PRINTING
Printing from the Label Collection
Using the Label Collection function, labels can be created easily by selecting and then
printing designs already built into the P-touch.
1
• Prepare the P-touch.
• Prepare the computer.
• Launch the P-touch Editor
Software.
Enter the label text using P-touch
Editor.
Editing a Label in the User's Guide
Create labels like these:
3
Label Printing in the User's Guide
• Remove the labels soon after they are cut so that they do not remain in the tape exit
slot.
• Do not position the P-touch vertically when using it. Otherwise, the cut labels could
fall into the P-touch and cause a malfunction.
To Next Page
Loading...
