50
Tutorial
→ The text is displayed in the Design Page.
Arrange the text.
Click .
→ The shape of the pointer changes to .
Click the text , hold down the
key, and then click the circle.
→ Both the circle and the text are selected.
Click Text, then Fit Text to Path Setting
menu.
For this example, use the default settings, and
then click OK.
b Memo:
• If you want to edit the entered text, click
on the Tool Box, click the text to select
it, and then select the menu command
Text
–
Edit Letters
. Edit the text in the
Edit Text
Letters
dialog box that appeared.
• If you want to delete the text, select it, and
then press the key.
• If you want to change the text color, font or
other attributes after entering the text, click
on the Tool Box, click the text to select
it, and then change the settings on the
Sewing Attributes bar.
Delete
6
Ctrl
To Next Page
Loading...
