Brother PE-DESIGN V7 - Step6 Saving the Embroidery Pattern; Step7 Transferring the Design to an Original Card

42
Tutorial
Step 6 Saving the embroidery
pattern
The embroidery pattern that was created can be
saved.
Click File, then Save As.
Type in the file name.
If necessary, change the drive and folder.
Click Save.
Step 7 Transferring the design to
an original card
By writing a pattern to a media that can be used in
your embroidery machine and transferring it to
your embroidery machine, you can actually sew
the pattern. For this example, we will transfer the
pattern to an original card.
Import the embroidery pattern into
Layout & Editing.
Click Stage, then To Layout & Editing, or
click .
→ Layout & Editing is started up.
Click Import.
→ The embroidery pattern created in Design
Center is imported into Layout & Editing.
b Memo:
For other media you may use include floppy
disks, compact flash memory, USB media and
etc.
1