Brother PE-DESIGN V7 - Page 58

52
Tutorial
→ The Sewing Attributes bar appears as
shown below.
For this example, use the default settings,
BLACK and Zigzag Stitch.
To change the color for the region, click .
→ The Sewing Attributes bar appears as
shown below.
For this example, select the color LEMON
YELLOW.
→ The embroidery pattern appears as
shown below.
Select a programmable fill stitch for the
sew type of the region.
Click , then Prog. Fill Stitch.
Click Sew, then Sewing Attribute Setting
menu.
2