Brother PJ-600 Series Product Safety Guide

15 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

PJ-722/PJ-723/PJ-762/PJ-763/

PJ-763MFi

PJ-773

Be sure to read this document before using the printer.

We recommend that you keep this document nearby for future reference.

UK ENG

Product Safety Guide PJ-722/PJ-723/PJ-762/PJ-763/PJ-

763MFi/PJ-773

Table of Contents

Other manuals for Brother PJ-600 Series

Online User's Guide165 pages

User Guide7 pages

Command Reference62 pages

Questions and Answers:

H
hornesarahAug 23, 2025
What to do if the Brother PJ-600 Printer DATA indicator remains green but doesn't print?
- M
  Michelle Nguyen DDSAug 23, 2025
  If the DATA indicator is lit but your Brother printer isn't printing, it could be due to several reasons. First, the printer might still be processing received data, so wait until it finishes. Ensure paper is loaded; if it is, try removing and reloading it. You can also try turning the printer off and on again. If sending simple ASCII text data, the printer may be waiting for a CR/LF command at the end of lines or a form feed command at the end of the last line. Print another page, or press the (Feed) button. Finally, the printer may have started in mass storage mode; in that case, turn it off and on again.
C
Christina SmithSep 1, 2025
How to confirm IP address and Subnet Mask for Brother PJ-600 Printer?
- A
  Allison CamposSep 1, 2025
  To confirm the IP address and the Subnet Mask for your Brother printer, confirm the IP address and the Subnet Mask. Verify that both the IP addresses and Subnet Masks of your computer and your printer are correct and located on the same network. Confirm your IP address, Subnet Mask and other network settings using the Printer Setting Tool.
D
dawnpriceAug 30, 2025
Why is my Brother PJ-600 Printer print quality poor?
- V
  Virginia KingAug 30, 2025
  If the print quality of your Brother printer is poor, and the printed image is too light or too dark, adjust the print density setting in the printer driver’s dialog box, or in the Printer Setting Tool. Also, ensure that you are using genuine Brother thermal paper.
A
Adrienne MayerAug 29, 2025
Why is the image compressed and stretched on my Brother Printer?
- K
  kevin55Aug 29, 2025
  If the image is compressed and stretched, make sure the release cover was not left open during printing and is now completely closed. Ensure you are using genuine Brother thermal paper, and that the paper is not wrinkled before loading.
R
raymond44Aug 28, 2025
How to reset Brother PJ-600 to factory settings?
- B
  Becky PenaAug 28, 2025
  To reset your Brother printer and delete the data transferred from a computer or mobile device, follow this procedure: 1. Confirm that the printer is turned off. 2. While holding down the (Feed) button, press the (Power) button three times, and then release the (Feed) button. The POWER indicator starts flashing in orange. 3. Press the (Feed) button three times to reset the printer's communication and device settings to their factory settings and delete all the data transferred to the printer.
C
Carla SmithAug 27, 2025
What to do if my Brother PJ-600 is not detected via Wi-Fi?
- D
  Dr. Heather GreenAug 27, 2025
  If your Brother printer (PJ-773 only) is not detected when establishing a Wi-Fi connection, check that the (Wi-Fi) indicator is lit in blue. If the (Wi-Fi) indicator is flashing or turned off, the Wi-Fi connection is not established. You can also check the Wi-Fi settings, print the printer settings, or specify the correct Wi-Fi settings in the Printer Setting Tool, consulting with the network administrator if needed.
J
Jennifer ThomasAug 27, 2025
What to do if Brother PJ-600 Printer prints blank pages?
- N
  Nicole HayesAug 27, 2025
  If your Brother printer feeds paper but nothing appears on the paper, ensure you are using thermal paper. Also, the print surface must face the back when looking from the front of the printer. You can also check the print density setting using the Printer Setting Tool.
T
Tyler TateAug 26, 2025
What to do if the Brother PJ-600 paper feeds through but nothing prints?
- B
  Brian WoodsAug 27, 2025
  If paper feeds through your Brother printer but nothing appears on it, make sure you are using thermal paper and that the print surface faces the back when looking from the front of the printer.
B
Brent RobbinsAug 25, 2025
What to do if my Brother Printer ejects a partially printed page?
- P
  Pam IrwinAug 26, 2025
  If your Brother printer ejects a partially printed page, ensure you are using the correct paper size setting.
K
Karen HayesAug 25, 2025
Why is my Brother PJ-600 Printer not feeding paper, even though the motor is running?
- T
  Todd StephensAug 25, 2025
  If your Brother printer's motor is running, but the paper isn't feeding, make sure the release cover is completely closed. Also, ensure you are using genuine Brother thermal paper, as other types may not feed correctly. If problems persist, the printer may be damaged.

Brother PJ-600 Series Specifications

General

Print Speed	Up to 5 inches per second
Maximum Print Width	4.09 inches
Weight	1.06 lbs
Print Technology	Thermal
Connectivity	USB
Power Source	AC Adapter

Related product manuals

Preview: Brother Pocketjet PJ-623

Brother Pocketjet PJ-623

Preview: Brother Pocketjet PJ-622

Brother Pocketjet PJ-622

Brother PocketJet PJ-663

Preview: Brother PJ-722

Preview: Brother PJ-822

Preview: Brother PocketJet PJ-523

Brother PocketJet PJ-523

Preview: Brother Pocket Jet PJ-722

Brother Pocket Jet PJ-722

Preview: Brother PJ763MFI

Brother PJ763MFI

PJ662 PocketJet 6 Print Engine with Bluetooth