EasyManua.ls Logo

Brother PJ-722 - Page 8

Brother PJ-722
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
English
If the power supply plug becomes dirty (for example, if it becomes covered with dust) disconnect it
from the electrical socket, and then wipe it with a dry cloth. If you continue to use a dirty power
supply plug, a fire may occur.
When disconnecting the AC power cord or Car adapter from the electrical socket, DO NOT pull on
the cord. Hold the plug and pull it out of the electrical socket.
DO NOT insert foreign objects into the terminals of the AC adapter or Car adapter, otherwise burns
or an electric shock may occur.
Use the AC adapter or Car adapter correctly and observe the following precautions (otherwise a fire
or electric shock may occur):
DO NOT damage the AC adapter or Car adapter.
DO NOT modify the AC adapter or Car adapter.
DO NOT twist the AC adapter or Car adapter.
DO NOT severely bend the AC adapter or Car adapter.
DO NOT pull on the AC adapter or Car adapter.
DO NOT place objects on the AC adapter or Car adapter.
DO NOT subject the AC adapter or Car adapter to heat.
DO NOT bind the AC adapter or Car adapter.
DO NOT allow the AC adapter or Car adapter to be pinched.
If the AC adapter or Car adapter is damaged, please contact your Brother dealer.
Keep the AC adapter or Car adapter out of the reach of children, particularly infants, otherwise an
injury may occur.
DO NOT use the AC adapter or Car adapter near microwave ovens, otherwise damage to the AC
adapter, Car adapter, or printer may occur.
DO NOT use the AC adapter or Car adapter near flames or heaters. If the covering of the AC
adapter or Car adapter cord melts, a fire or electric shock may occur.
Before performing maintenance on the printer, such as cleaning, disconnect the AC adapter or Car
adapter from the electrical socket, otherwise an electric shock may occur.
DO NOT allow organic solvents, such as benzene, thinner, polish remover, or deodorisers, to come
into contact with the plastic cover. These may cause the plastic cover to warp or dissolve, resulting
in an electric shock or fire.
If the printer will not be used for a long period of time, disconnect the AC adapter or Car adapter
from the printer and from the electrical socket for safety reasons.
WARNING

Other manuals for Brother PJ-722

Related product manuals