Brother PJ-723 - Page 76

Changing the Printer Settings
68
3
Available settings: [Enable], [Disable]
8 Dash Line Print
Prints dash lines between pages, useful when printing on roll paper. Set [Form Feed Mode] to [Fixed
Page], and then select [Enable]. Note that dash lines are printed on the paper; they are not punched into
the paper.
Available settings: [Enable], [Disable]
9Tear Adjust
Adjust the tear bar tear off position for paper media.
Available settings: [+0.08"], [+0.06"], [+0.04"], [+0.02"], [0"], [-0.02"], [-0.04"], [-0.06"], [-0.08"]
([+2.0 mm], [+1.5 mm], [+1.0 mm], [+0.5 mm], [0mm], [-0.5 mm], [-1.0 mm], [-1.5 mm], [-2.0 mm])
Note
For the following settings, the printer driver settings have priority:
•Print Density
• Print Speed
• Dash Line Print