Brother PJ-773 User Manual (English)

Other manuals for Brother PJ-773

User Guide7 pages

Product Safety Guide15 pages

Command Reference62 pages

Questions and Answers:

J
Jeffrey LivingstonSep 2, 2025
What to do if the Brother PJ-773 Printer application isn't sending data and the DATA indicator isn't green?
- B
  Bryan BlevinsSep 2, 2025
  If the DATA indicator on your Brother printer isn't lighting up green when the application sends data, check the connection. For USB, ensure the cable is firmly and correctly connected, and try a different USB cable. For Bluetooth (PJ-762/ PJ-763/PJ-763MFi only), verify the (Bluetooth) indicator is lit blue and specify the correct Bluetooth settings in the Printer Setting Tool. For Wi-Fi (PJ-773 only), check that the (Wi-Fi) indicator is lit blue and specify the correct Wi-Fi settings in the Printer Setting Tool.
A
April ClarkSep 1, 2025
How to confirm IP address and Subnet Mask for Brother Printer?
- D
  Darren SloanSep 1, 2025
  To confirm the IP address and the Subnet Mask for your Brother printer, confirm the IP address and the Subnet Mask. Verify that both the IP addresses and Subnet Masks of your computer and your printer are correct and located on the same network. Confirm your IP address, Subnet Mask and other network settings using the Printer Setting Tool.
M
Michael MurphyAug 30, 2025
Why is my Brother Printer print quality poor?
- J
  Jodi MurphyAug 30, 2025
  If the print quality of your Brother printer is poor, and the printed image is too light or too dark, adjust the print density setting in the printer driver’s dialog box, or in the Printer Setting Tool. Also, ensure that you are using genuine Brother thermal paper.
M
mcleanginaAug 29, 2025
Why is the image compressed and stretched on my Brother Printer?
- R
  Russell AustinAug 29, 2025
  If the image is compressed and stretched, make sure the release cover was not left open during printing and is now completely closed. Ensure you are using genuine Brother thermal paper, and that the paper is not wrinkled before loading.
A
Alexa PhillipsAug 28, 2025
How to reset Brother PJ-773 Printer to factory settings?
- A
  Allison SandovalAug 28, 2025
  To reset your Brother printer and delete the data transferred from a computer or mobile device, follow this procedure: 1. Confirm that the printer is turned off. 2. While holding down the (Feed) button, press the (Power) button three times, and then release the (Feed) button. The POWER indicator starts flashing in orange. 3. Press the (Feed) button three times to reset the printer's communication and device settings to their factory settings and delete all the data transferred to the printer.
V
Veronica McbrideAug 27, 2025
What to do if my Brother Printer is not detected via Wi-Fi?
- C
  Cole CamposAug 27, 2025
  If your Brother printer (PJ-773 only) is not detected when establishing a Wi-Fi connection, check that the (Wi-Fi) indicator is lit in blue. If the (Wi-Fi) indicator is flashing or turned off, the Wi-Fi connection is not established. You can also check the Wi-Fi settings, print the printer settings, or specify the correct Wi-Fi settings in the Printer Setting Tool, consulting with the network administrator if needed.
S
Scott HartAug 27, 2025
What to do if Brother PJ-773 prints blank pages?
- A
  Andre JacksonAug 27, 2025
  If your Brother printer feeds paper but nothing appears on the paper, ensure you are using thermal paper. Also, the print surface must face the back when looking from the front of the printer. You can also check the print density setting using the Printer Setting Tool.
A
autumnhartmanAug 26, 2025
What to do if the Brother PJ-773 paper feeds through but nothing prints?
- T
  tbrownAug 26, 2025
  If paper feeds through your Brother printer but nothing appears on it, make sure you are using thermal paper and that the print surface faces the back when looking from the front of the printer.
A
amy87Aug 26, 2025
What to do if my Brother PJ-773 ejects a partially printed page?
- L
  larry78Aug 26, 2025
  If your Brother printer ejects a partially printed page, ensure you are using the correct paper size setting.
A
adamsmarkAug 23, 2025
What to do if the Brother PJ-773 Printer DATA indicator remains green but doesn't print?
- A
  Amy KnightAug 23, 2025
  If the DATA indicator is lit but your Brother printer isn't printing, it could be due to several reasons. First, the printer might still be processing received data, so wait until it finishes. Ensure paper is loaded; if it is, try removing and reloading it. You can also try turning the printer off and on again. If sending simple ASCII text data, the printer may be waiting for a CR/LF command at the end of lines or a form feed command at the end of the last line. Print another page, or press the (Feed) button. Finally, the printer may have started in mass storage mode; in that case, turn it off and on again.

Brother PJ-773 Specifications

General

Printing Technology	Direct Thermal
Resolution	300 x 300 dpi
Print Speed	Up to 8 ppm
Connectivity	USB, Wi-Fi
Maximum Paper Width	8.5 inches
Power Source	AC Adapter
Media Size	A4, Letter, Legal