How to fix unreadable barcodes from Brother Label Maker?
Print labels so that barcodes are aligned with the Print Head. Try using another scanner. It is recommended to print the barcodes with Standard selected from the Quality options.
How to improve print quality on Brother PT-D800W Label Maker?
For poor print results on your Brother Label Maker, use high-resolution printing if available. Ensure you are printing from a computer, the AC adapter is connected, and TZe and HGe laminated tape with black ink are installed. Use the printer driver to select the high-resolution mode. If using the high-speed printing setting, switch to the standard setting.
What to do if my Brother PT-D800W Label Maker display remains blank?
If your Brother Label Maker's display is blank and the power indicator is off, it's likely not receiving power. If you're using AC power, ensure the AC adapter is correctly connected to both the label maker and the electrical socket. If you're using a rechargeable Li-ion battery, verify that the battery is firmly installed and fully charged.
How to unlock Brother PT-D800W screen?
Reset the internal memory to the factory settings. If resetting the Brother Label Maker doesn't solve the problem, disconnect the AC adapter and remove the battery for more than 10 minutes.
How to find the firmware version on my Brother PT-D800W?
To find the firmware version on your Brother Label Maker: 1. Select [Settings] in the Home screen. 2. Select [Version Information]. Alternatively: 1. Turn your P-touch labeling system on. 2. Press and hold the (Feed and Cut) button for more than 10 seconds to print the report. (Use 24 mm or 36 mm tape.)
What to do if my Brother PT-D800W screen is locked?
If the screen of your Brother Label Maker is locked or not responding, try resetting the internal memory to the factory settings. If this doesn't solve the problem, disconnect the AC adapter and remove the battery for more than 10 minutes.
How to adjust margins on Brother PT-D800W?
The length and margins can be adjusted in the Printer Setting Tool.
Why does my Brother PT-D800W stop while printing?
If your Brother Label Maker stops while printing, replace the tape cassette if striped tape is visible, indicating the end of the tape. Also, connect the AC adapter directly to the label maker or charge the rechargeable Li-ion battery.
What to do if the Brother Label Maker display is blank?
If the Brother Label Maker display is blank after turning it on, and the power indicator is off, it's likely not receiving power. If using AC power, ensure the AC adapter is correctly connected to both the label maker and a power outlet. If using a rechargeable Li-ion battery, confirm it's firmly installed and fully charged. Also, check that the Keyboard LCD Unit Cable is securely connected to the Keyboard LCD Unit and Keyboard LCD Unit interface of the label maker.
Why is my Brother Label Maker not cutting automatically?
Check the Cut Option setting on your Brother Label Maker.
General| Brand | Brother |
|---|---|
| Model | PT-D800W |
| Category | Label Maker |
| Language | English |
Steps to set up the P-touch labeling system, including hardware connections and initial configuration.
Instructions on using the keyboard to create and print labels, covering key functions and LCD display.
Covers using the Printer Setting Tool for configuring device and communication settings.
Instructions for creating and editing labels using P-touch Editor software.
Steps to configure network settings like IP address, subnet mask, and gateway.
Procedures for resetting system settings to factory defaults or clearing specific data.
Guides on cleaning the unit, print head, rollers, and other components.
Common problems and their solutions for LCD, printing, network, and error messages.
To Next Page
