8
MELSEC iQ-F Brother Label Printer Sample Program Reference Manual
2.2.2. For Ethernet connection
Label printer
The sample program for Ethernet connection is applied to the following Brother label printers.
Brother label printers
PT-P950NW
TD-4420DN
TD-4520DN
TD-4550DNWB
TD-2120N
TD-2130N
TD-2130NSA
* Any printers other than above list, which has P-touch Template command mode and interface of serial or
Ethernet, have possibility to connect with the programmable controller. For more detail, refer to the
following URL.
(
https://support.brother.com/g/s/es/dev/en/command/reference/index.html?c=eu_ot&lang=en&navi=offall
&comple=on&redirect=on)
Hub
Switching hub supporting 100BASE-TX (or repeater hub)
LAN cable
Category 5 cable supporting 100BASE-TX
To Next Page
Loading...
