MANUAL tJU_,L _ l ,J_V
If you have overlooked an error in a text and have already moved to a different
line, you can still correct it by using the manual correction method.
Manual correction
(_ _ and
+ retype wrong
character
1) Return the paper to the line of the character to be corrected using [CODE]
+ [INDEX] (P) or [CODE] + [REV] (O).
2) Line up the carder with the error using ]BACKSPACE] or [SPACE EARl.
3) Press[CODE]+[CORRECT].The"M.CORRECTlON"promptwillappear
on the display.
I:, ]
4) Type the incorrect character to remove it. Use [SHIFT] for uppercase
characters, and set the typewriter in underlining mode to correct an
underlined character.
5) Type the correct character.
22
To Next Page
Loading...
