TROUBLESHOOTING
Problem
Problem Solution
Nothing happens when power !, ISthe powercord plugged in?
switch is turned on
Poor printingperformance
or printout is impossible
Poor correction performance
1. Isthe daisy wheel properly installed?
(Hasthe lever been pressed firmly?)
2, Haveyou run out of ribbon?
3. Try to press [CODE] ÷ [RESET] (Q) to
detect the home position of the carrier.
1, Hasthe correction tape been properly
installed?
2, Have you run out of correction tape?
3. Are you using the proper cOrreCtiOn
tape?
4. Try to press[CODE] ÷ [RESET] (Q) to
detectthe home position of the carrier.
39
To Next Page
Loading...
