Brother TJ-4520TN User Manual (English)

Other manuals for Brother TJ-4520TN

Questions and Answers:

J
Joseph CantrellAug 21, 2025
How to fix Brother TJ-4520TN Printer when it is not printing?
- D
  Dawn ChapmanAug 21, 2025
  If your Brother Printer is not printing, it might be due to several reasons. First, check if the serial or USB cable is correctly connected, and reconnect it if necessary. If you are using a wireless connection, reset the device's wireless settings and set it up again. The cable itself might be damaged, so try using a new one. Also, ensure that the port specified in the Windows driver is correct. The print head may also need cleaning. If you're using a custom program, verify that it contains the PRINT command at the end of the file and a CRLF at the end of each command line.
E
Evan ArmstrongAug 23, 2025
What to do if my Brother TJ-4520TN Printer shows 'Paper Jam'?
- E
  Ernest MillerAug 23, 2025
  If your Brother Printer indicates a paper jam, first, calibrate the Gap/Black Mark Sensor. Next, ensure that the label size is set up correctly. Finally, carefully remove any jammed paper from inside the printer.
H
heather75Aug 25, 2025
What to do if my Brother Printer has blank labels with gray lines?
- L
  lewiskrystalAug 25, 2025
  If your Brother Printer is producing blank labels with gray lines, the Print Head may be dirty, so clean it. Also, the Platen Roller might be dirty, so ensure you clean that as well.
T
Tina CooperAug 26, 2025
What to do if my Brother Printer shows 'No Paper'?
- T
  Tamara HerreraAug 27, 2025
  If your Brother Printer displays a 'No Paper' message, first, install a new label roll if the current one has finished. If the issue persists, reinstall the label roll to ensure it's correctly placed. Additionally, calibrate the Gap/Black Mark Sensor.
C
Christina KruegerAug 28, 2025
What to do if my Brother Printer memory is full?
- E
  ehuynhAug 28, 2025
  If your Brother Printer displays a 'Memory full' error, it indicates that the printer's DRAM/Flash/ Card memory is full. To resolve this, delete unused files from the DRAM/Flash/ Card memory.
V
Victoria MurphyAug 29, 2025
Why is my Brother TJ-4520TN producing poor print quality?
- P
  Pamela MartinAug 29, 2025
  Poor print quality on your Brother Printer can arise from several factors. Ensure the ribbon and media are loaded correctly. Clean the Print Head, as dust or adhesive may have accumulated. Adjust the print density and print speed. Run a self-test to check the Print Head for damage, looking for missing dots in the test pattern. Verify that you are using compatible ribbon and media. Adjust the Print Head tension using the Print Head Tension Adjustment Knob. Also, make sure the Release Lever is locked in place.
B
Brittney McmahonAug 31, 2025
How to resolve no print on the label with my Brother TJ-4520TN?
- S
  seanbrownAug 31, 2025
  If your Brother Printer is not printing on the label, start by reloading the media/ribbon to ensure it's correctly installed. If the issue persists, the ribbon/media may be incompatible, so install the correct type. Also, check the print density/darkness settings and adjust them as needed.
C
Calvin GrahamSep 2, 2025
How to fix Brother TJ-4520TN Printer labels that are skipped when printing?
- G
  gbriggsSep 2, 2025
  If your Brother Printer is skipping labels during printing, verify that the label size is correctly specified in your settings. Additionally, calibrate the Gap Sensor either manually or automatically. Finally, clean the Gap/Black Mark Sensor using compressed air or a vacuum to remove any accumulated dust.
M
Monica SalazarSep 3, 2025
How to fix Brother TJ-4520TN labels that are fed incorrectly (skewed) when printing?
- K
  Kimberly MitchellSep 3, 2025
  If labels are fed incorrectly (skewed) when printing with your Brother Printer, and the label is moving to the right side, move the Front Label Guide to the left. If the label is moving to the left side, move the Front Label Guide to the right.
N
Natasha BarberSep 5, 2025
How to resolve irregular printing on Brother TJ-4520TN Printer?
- S
  silvajasmineSep 5, 2025
  If your Brother Printer is exhibiting irregular printing, it may be in Hex Dump Mode. Turn the printer off and on to skip the Dump Mode. Also, the printer’s RS-232 communication may not be set correctly, so ensure the printer's RS-232 settings are properly configured.

Brother TJ-4520TN Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	300 dpi
Connectivity	USB, Serial, Ethernet, USB Host
Ribbon Core	1 inch (25.4 mm)
Cutter	Optional
Peeler	Optional
Maximum Print Width	4.09 inches (104 mm)
Memory	256 MB RAM, 64 MB Flash
Media Type	Fanfold
Media Thickness	0.0028 to 0.0079 inches (0.07 to 0.2 mm)
Ribbon Width	4.33 inches (110 mm)
Operating Temperature	41°F - 104°F (5°C - 40°C)