BRP Evinrude E-Tec 15 HP User Manual

©2012 Bombardier Recreational Products Inc. (BRP). All rights reserved.
®
,
TM
and the BRP logo are trademarks of BRP or its affiliates.
www.brp.com
SKI-DOO
®
SEA-DOO
®
CAN-AM
®
LYNX
®
EVINRUDE
®
JOHNSON
®
ROTAX
®
*5009015*
Evinrude E-TEC Installation and Predelivery
P/N 5009015 Nov. 2012
Installation and Predelivery
November 2012

BRP Evinrude E-Tec 15 HP Specifications

General

Horsepower	15 HP
Engine Type	2-Stroke
Cylinders	2
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Tiller
Fuel Tank	External
Displacement	362 cc (22.1 cu. in.)
Fuel Induction System	Direct Injection
Alternator Output	6 Amps
Shaft Length	381 mm (15 in.), 508 mm (20 in.)
Oil Tank	Integrated

Summary

Safety Information

DANGER

Critical hazards that can cause death or serious injury if not avoided.

WARNING

Hazardous situations that could result in death or serious injury.

CAUTION

Hazardous situations that may cause minor or moderate personal injury.

Outboard Installation

Hull Preparation

Transom Measuring and Drilling

Precise measurements and drilling for outboard mounting.

Lifting the Outboard

Outboard Mounting

Securing the outboard to the transom and mounting hardware.

Outboard Rigging

Common Practices – All Models

Evinrude E-TEC 90° V Models 200–300 HP

Evinrude E-TEC 60° V Models 115–200 HP

Evinrude E-TEC Models 40–90 HP

Evinrude E-TEC Models 15–30 HP

Fuel and Oil Priming

Fuel Requirements

Fuel System Priming

Step-by-step guide for priming the fuel system.

Oil Supply Priming

Procedures for priming the engine's oil supply system.

Predelivery

Before Start-Up

Running Checks

Operational checks to perform after starting the engine.

Water Test and Final Adjustments

Fine-tuning engine performance and systems during water testing.