BRP Evinrude E-Tec 15 HP - Page 51

49
OUTBOARD INSTALLATION
OUTBOARD MOUNTING
2
Install the mounting bolts through the stern brack-
ets and transom. Install round backing plates and
locknuts onto bolts and tighten securely.
25–30 HP, MANUAL TILT MODELS
15 HP, POWER TILT MODELS
Install the mounting bolts through the stern brack-
ets and transom. Install round backing plates and
locknuts onto bolts and tighten securely.
1. Transom mounting plate
2. Round backing plates
3. Locknuts
008015
1. Round backing plates
2. Locknuts
3. Nut and washer (15 HP)
008014
3
1
2
3
2
1