EasyManua.ls Logo

BRP Evinrude E-TEC 40 - Page 80

BRP Evinrude E-TEC 40
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
Product Information
Specifications
60 H.O., 65, 75, 90 Models
Displacement 79.1 cu. in. (1296 cc)
Engine Type In-line, 3 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating Range 60 H.O. – 5000 to 5500 RPM
65 HP – 5000 to 5500 RPM
75 HP – 5000 to 5500 RPM
60 Jet / 90 HP – 5000 to 5500 RPM
Power
(1)
60 H.O. – 60 HP (44.13 kw) @ 5500 RPM
65 HP – 65 HP (47.8 kw) @ 5000 RPM
75 HP – 75 HP (55.16 kw) @ 5000 RPM
60 Jet / 90 HP – 90 HP (66.19 kw) @ 5000 RPM
Idle RPM in Gear
(2)
700 ± 50
Idle RPM in Neutral
(2)
600 ± 50
Ignition Timing
(2)
Not Adjustable
Emission Control System:
per SAE J1930
(2)
ECM, E-TEC (Engine Control Module, E-TEC)
Fuel Requirements
(2)
87 Pump Posted AKI (90 RON)
– Refer to
Fuel Requirements on page 21
Oil – Lubricant
– Capacity
TC-W3 NMMA-certified oil or Evinrude XD100 oil
– Refer to
Oil Requirements on page 18
2.4 qt. (2.3 l)
Warning Signals Controlled by the outboard’s EMM
Battery, Minimum
(3)
640 CCA (800 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 32°F (0°C)
Spark Plug
(2)
Refer to Parts Catalog or engine ECI Label
Fuses P/N 967545 – Refer to
Fuse on page 60
Fuel Filter (12 to 15 micron) P/N 5007335 – In-line Replaceable
Battery Charging 25-Amp, Fully Regulated
Gearcase Lubricant
(4)
Capacity
Evinrude HPF–Pro
L Models – 32.1 fl. oz. (950 ml)
X Models – 32.8 fl. oz. (970 ml)
Power Trim/Tilt – Fluid
Capacity
Evinrude Biodegradeable Trim & Tilt Fluid, P/N 763439
21 fl. oz. (622 ml)
Propeller Refer to
Propeller Selection on page 74
Weight L Models – 320 lbs. (145 kg)
X Models – 335 lbs. (152 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
76.8 dB(A)
Transom Height L Models – 19 1/2 to 20 in. (495 to 508 mm)
X Models – 24 1/2 to 25 in. (622 to 635 mm)
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
(2) Emission Control Information.
(3) Use a 800 CCA (1000 MCA) battery when operating in temperatures below 32°F (0°C).
(4) Use Evinrude HPF Pro Gearcase Lubricant for high performance outboards and commercial
applications. Evinrude HPF Pro Gearcase Lubricant delivers exceptional durability and reliability and
promotes long gearcase life in marine use.

Table of Contents

Related product manuals