45
(1) Declared power as per ISO 8665 at pro-
peller shaft.
NOTE: BRP reserves the right to make
changes in design and specifications and/or
to make additions to, or improvements in its
products without imposing any obligation
upon itself to install them on its products pre-
viously manufactured.
Fuel System
OCTANE RATING FOR
OPTIMUM PERFORMANCE
– XX
Inside North America: 91 (RON+MON)/2
Outside North America: 95 RON
MINIMUM OCTANE RATING
XXX
Inside North America: 87 (RON+MON)/2
Outside North America: 92 RON
Propulsion System
Jet pump type
Liquid cooled. Closed system
(see also EXHAUST SYSTEM)
Jet pump grease BRP Jet Pump Bearing Grease, P/N 460785
Transmission Crowned splines, direct drive
Pivoting angle of direction (nozzle) 20°
Minimum required water level for
jet pump(s)
90 cm (3 ft) underneath the lowest rear
portion of hull
Dimensions, Weight and Loading Capacity
See documentation of hull manufacturer
Capacities
Engine oil/engine 3 L (3.2 qt (U.S. liq.)) oil change w/filter
Engine cooling system 5.5 L (5.8 qt (U.S. liq.)) total
Fuel Tank See documentation of hull manufacturer
Models 150 200 250
To Next Page
Loading...
Need help?
General
