What to do if my BRP VIBE Conference System device does not turn on?
First, connect a USB-C cable and charger to the Vibe communication system. The light on the User interface should illuminate red, indicating it is charging. If the light doesn't turn red, or if, after 20 minutes of charging, the Vibe doesn't turn on, or if the Vibe communication system looks swollen, hot, or suddenly stopped working, the battery might be defective.
What to do if my BRP VIBE Conference System device does not work properly?
If the device isn't functioning correctly, you can reset it. Locate the Reset button next to the USB port and use a paper clip to gently press the button once. The Vibe communication system will then turn off and reset itself.
Why my phone does not connect with the BRP Vibe Communication System?
Try navigating to the configuration menu of the Vibe and reconnect your phone. Please note that not all phones are compatible with The Vibe communication system.
What to do if the microphone is not working on BRP VIBE Conference System?
Check that the RED connector coming out of the microphone is connected to the RED connector on the main unit. If the connection is secure, the microphone may need replacement.
How to fix a BRP VIBE Conference System when one speaker is not working?
Check that the BLACK connector coming out of the speaker is connected to the BLACK connector on the main unit. If the connection is good, the speaker might need to be replaced.
What to do if the flashlight does not turn on on BRP Conference System?
Verify the flashlight connection to the Vibe by unplugging it and plugging it back in.
General| Brand | BRP |
|---|---|
| Model | VIBE |
| Category | Conference System |
| Language | English |
Provides crucial safety guidelines and warnings for using the Vibe system.
Outlines the essential equipment needed for the Vibe communication system.
Details the physical components and parts of the Vibe communication system.
Guides on preparing the helmet for Vibe system installation, including removing parts.
Step-by-step instructions for installing the Vibe communication system into a compatible helmet.
Specific installation procedure for Vibe speakers with the helmet's Noise Control System (NCS).
Installation guide for Vibe speakers when the helmet does not have a Noise Control System.
Instructions for installing Vibe speakers using the helmet's ear pads.
Detailed steps for correctly installing the Vibe system's microphone.
Guidance on organizing and managing cables for the Vibe system within the helmet.
Instructions on how to reinstall the cheek pads after Vibe system installation.
Steps for reattaching the rear trim of the helmet after system installation.
Procedures for installing or reinstalling the chin curtain for the helmet.
How to use the BRP GO! app for setup, management, and accessing support for the Vibe device.
Information on using the Sena Device Manager for firmware upgrades and configuration.
Instructions on how to charge the Vibe communication system's battery.
How to check the current battery status of the Vibe device using the BRP GO! app.
Steps to change the name of your Vibe device via the BRP GO! app.
Identifies and explains the buttons and controls on the Vibe system's main unit.
Instructions on how to turn the Vibe communication system on and off.
Guides on how to quickly pair your phone with the Vibe system via Bluetooth.
How to connect the Vibe system to the vehicle's HUB via Bluetooth.
Steps to pair a separate remote control device with the Vibe system.
Explains how to adjust volume levels for voice prompts, media, and mesh intercom.
How to accept, reject, and end phone calls using the Vibe system.
Instructions for playing, pausing, and skipping music tracks with the Vibe system.
Details on using the Open Mesh intercom function for group communication.
How to activate and use your phone's voice assistant with the Vibe system.
Clears all previously paired Bluetooth devices from the Vibe system.
Restores the Vibe system to its original factory default settings.
Guidelines on approved modifications and accessories for the Vibe system.
Common issues, solutions, repair guidance, and warranty information for the Vibe system.
Information on obtaining spare parts and contacting BRP for support.
Provides BRP contact details for support and information worldwide by region.
To Next Page