Need help?Do you have a question about the Bruker D8 ADVANCE and is the answer not in the manual?
General| Goniometer | Vertical Theta/Theta goniometer |
|---|---|
| Minimum Step Size | 0.0001° |
| X-ray Source | Ceramic X-ray tubes with Cu, Co, Mo, Cr |
| X-ray Generator | 3 kW generator |
| Maximum Power | 3 kW |
| Detector | LynxEye detector |
| Software | DIFFRAC.SUITE |
| Applications | Phase identification, texture analysis, residual stress analysis, thin film analysis |
| Theta/2Theta Range | -110° to +168° |
Defines three performance verification levels for instrument functionality.
Explains performance verification for Good Practice guidelines in regulated areas.
Details the certified reference material (NIST SRM1976c) used for verification.
Lists required instrument parameters for different system configurations.
Specifies scan angles, step widths, and step times for measurements.
Outlines how to evaluate measurement data using DIFFRAC.EVA.
Lists reference values for peak positions and relative intensities.
Lists maximum allowed values for line shape (FWHM).
Protocols for verifying instrument performance at the factory.
Protocols for verifying instrument performance at the customer's site.
Procedure for routine daily instrument performance checks.
To Next Page