Brush Bandit 150 - User Manual

BRUSH CHIPPER
MODELS 90/150/200
OPERATING & PARTS MANUAL
ATTENTION:
Depending on what replacement
parts you are ordering, we will
need the following information:
CHIPPER COMPONENTS
Serial Number
Model Number of Chipper
ENGINE COMPONENTS
Brand
Engine Serial Number
Engine Spec. Number
CLUTCH COMPONENTS
Brand
Serial Number
Assembly of Clutch
MANUFACTURED BY
BANDIT INDUSTRIES, INC.
6750 Millbrook Road
REMUS, MICHIGAN, USA 49340
PHONE: (800) 952-0178 IN USA
PHONE: (989) 561-2270 OR 561-2272
FAX: (989) 561-2273 ~ SALES DEPT.
FAX: (989) 561-2962 ~ PARTS/SERVICE
E-MAIL: www.banditchippers.com
Model No: _________________
Serial No: _________________
DEALER:
Name: ____________________
Address: __________________
City/State: _________________
Phone No: _________________
Delivery Date: ______________
Engine Make: ______________
Serial No: _________________
Clutch Make: _______________
Model: _________ S/N _______
Copyright 5/11
BUILT WITH QUALITY
AND DESIGN FIRST

Summary

Serial Number Locations

Machine Safety Procedures

General Machine Safety Rules

Provides fundamental safety rules, signal word definitions, and operator responsibilities.

Operational & Maintenance Safety Guidelines

Covers specific safety practices for operating, maintaining, and servicing the machine.

Transportation & Slope Operation Safety

Equipment Specifications

Autofeed System Features

Autofeed System Troubleshooting

Machine Controls and Operation

Feed Control Handle Operation

Engine Control Operations

Transportation Procedures

Maintenance Schedule and Procedures

Daily Start-Up & Maintenance Checklist

Outlines daily checks to ensure proper machine operation and safety.

Periodic Maintenance Schedule

Machine Lubrication Chart

Details lubrication points and frequency for various machine components.

Chipper Assembly and Maintenance

Chipper Problem Troubleshooting

Addresses common issues like poor chip quality, plugging, and worn components.

Chipper Knife Grinding and Filing

Chipper Knife Replacement Procedure

Provides a step-by-step guide for safely replacing chipper knives.

Hydraulic System Information

Hydraulic Fluid Requirements

Specifies the type and specifications for hydraulic fluid.

Hydraulic Pressure Settings Guide

Details recommended hydraulic pressure settings for different models.

Hydraulic System Troubleshooting

Offers solutions for common hydraulic system issues like overheating.

PTO Components and Assemblies

Brush Bandit 150 Specifications

General

Engine Type	Gas or Diesel
Engine	Various options from Kubota, PSI, and Vanguard
Chipping Capacity	12 inches
Chipper Capacity	12 inches
Weight	4, 900 lbs (gas) - 5, 600 lbs (diesel) (depending on engine option and configuration)
Feed System	Hydraulic
Cutter Wheel Diameter	24 inches
Feed Type	Hydraulic
Feed Wheels	Dual horizontal