Brush Bandit 95XL - User Manual

BRUSH CHIPPER
MODELS 65XP(XL)/95
OPERATING & PARTS MANUAL
ATTENTION:
Depending on what replacement
parts you are ordering, we will
need the following information:
CHIPPER COMPONENTS
Serial Number
Model Number of Chipper
ENGINE COMPONENTS
Brand
Engine Serial Number
Engine Spec. Number
CLUTCH COMPONENTS
Brand
Serial Number
Assembly of Clutch
MANUFACTURED BY
BANDIT INDUSTRIES, INC.
6750 Millbrook Road
REMUS, MICHIGAN, USA 49340
PHONE: (800) 952-0178 IN USA
PHONE: (989) 561-2270 OR 561-2272
FAX: (989) 561-2273 ~ SALES DEPT.
FAX: (989) 561-2962 ~ PARTS/SERVICE
E-MAIL: www.banditchippers.com
Model No: _________________
Serial No: _________________
DEALER:
Name: ____________________
Address: __________________
City/State: _________________
Phone No: _________________
Delivery Date: ______________
Engine Make: ______________
Serial No: _________________
Clutch Make: _______________
Model: _________ S/N _______
Copyright 1/10
BUILT WITH QUALITY
AND DESIGN FIRST

Summary

Introduction and Warranty Information

Introduction to the Manual

Explanation of Limited Warranty

Details the terms, conditions, and limitations of the manufacturer's warranty for the chipper.

Safety Procedures and Warnings

Understanding Safety Signal Words

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signal words used in the manual.

General Operational Safety Guidelines

Covers critical safety precautions for operating the chipper, including hazard avoidance and protective measures.

Autofeed System Options

Autofeed Terminology

Autofeed Troubleshooting Guide

Provides guidance for identifying and resolving common problems with the autofeed system.

Machine Controls and Operation

Feed Control Handle Operation

Control Locations Overview

Winch and Engine Disable Plug Operation

Details procedures for operating the winch and the chipper hood engine disable plug.

Transportation Procedures

Loading and Unloading Self-Propelled Machines

Maintenance Section

Daily Startup and Maintenance Checklist

Lists essential daily checks and maintenance tasks for proper machine operation.

Torque Charts and Wheel Requirements

Belt Tensioning

General Rules and Procedures for Belt Tensioning

Provides rules and step-by-step procedures for correctly tensioning machine belts.

Model 65 Drive Belt Replacement

Coupler and Feedwheel Motor Procedures

Anvil Adjustment

Anvil to Knife Clearance Check and Adjustment

Guides on checking and adjusting the clearance between the anvil and chipper knives.

Feedwheel Bearing Servicing

Chipper Unplugging Procedure

Chipper Section

Chipper Troubleshooting Guide

Addresses common chipper problems like poor chip quality and plugging.

Chipper Knife Maintenance and Replacement

Details procedures for grinding, filing, and changing chipper knives safely.

Lubrication and Coolant Requirements

Brush Bandit 95XL Specifications

General

Brand	Brush Bandit
Model	95XL
Category	Chipper
Language	English