Brush Bandit 65A User Manual

BRUSH BANDIT
BRUSH CHIPPER
MODEL 65A
MODEL 65AW
OPERATING & PARTS MANUAL
BUILT WITH QUALITY AND DESIGN FIRST
ATTENTION:
Depending on what replacement
parts you are ordering, we will
need the following information:
CHIPPER COMPONENTS
Serial Number
Model Number of Chipper
ENGINE COMPONENTS
Engine Size
Engine Serial Number
Engine Spec. Number
CLUTCH COMPONENTS
Name of Manufacturer
Serial Number
Assembly of Clutch
Model No: __________________
Serial No: __________________
DEALER:
Name: _____________________
Address: ___________________
City/State: __________________
Phone No: __________________
Delivery Date: _______________
Engine Make: _______________
Serial No: __________________
Clutch Make: ________________
Model: _________ S/N ________
PRINTED 4/02
65A & 65AW
MANUFACTURED BY
BANDIT INDUSTRIES, INC.
6750 Millbrook Road
REMUS, MICHIGAN, USA 49340
PHONE: (989) 561-2270 OR 561-2272
FAX: (989) 561-2273 ~ SALES DEPT.
FAX: (989) 561-2962 ~ PARTS/SERVICE
®

Brush Bandit 65A Specifications

General

Brand	Brush Bandit
Model	65A
Category	Chipper
Language	English

Summary

Introduction and Warranty Information

Safety Procedures and Guidelines

General Safety Practices

Emphasizes reading and following all safety procedures, wearing protective gear, and maintaining situational awareness.

Safety Decals and Locations

Decal Locations for Model 65A & 65AW

Autofeed Options and System

Controls and Operation

Start-Up Procedures

Daily Start-Up Checklist

Provides a comprehensive daily checklist to ensure safe and proper machine readiness before operation.

Before Starting Engine Steps

Lists essential steps and checks to perform before starting the chipper's engine for operation.

Maintenance Section

Maintenance Procedures and Schedules

Details the procedures for daily, weekly, and monthly checks, including torques and replacement intervals.

Procedure for Unplugging Your Chipper

Steps for Clearing Chipper Blockages

Provides step-by-step instructions for safely clearing blockages in the chipper housing and discharge chute.

Hydraulic Section

Hydraulic System Overview and Components

Hydraulic Pressure Adjustment and Troubleshooting

Guides on diagnosing and fixing issues related to relief valves, pumps, motors, and oil flow in the hydraulic system.

Chipper Section

Chipper Troubleshooting and Knife Maintenance

Addresses chip quality issues, knife problems, discharge blockages, and bearing maintenance.

Electrical Section

Replacement Parts Section

Part Information for Chipper, Engine, and Clutch

Infeed Hopper Components

Chipper Components

Hydraulic Components