Brush Bandit 1850 User Manual

WHOLE TREE CHIPPER
MODEL 1850
OPERATING & PARTS MANUAL
MANUFACTURED BY
BANDIT INDUSTRIES, INC.
6750 Millbrook Road
REMUS, MICHIGAN, USA 49340
PHONE: (800) 952-0178 IN USA
PHONE: (989) 561-2270 OR 561-2272
FAX: (989) 561-2273 ~ SALES DEPT.
FAX: (989) 561-2962 ~ PARTS/SERVICE
E-MAIL: www.banditchippers.com
Model No: _________________
Serial No: _________________
DEALER:
Name: ____________________
Address: __________________
City/State: _________________
Phone No: _________________
Delivery Date: ______________
Engine Make: ______________
Serial No: _________________
Clutch Make: _______________
Model: _________ S/N _______
Copyright 9/07
1850
ATTENTION:
Depending on what replacement
parts you are ordering, we will
need the following information:
CHIPPER COMPONENTS
Serial Number
Model Number of Chipper
ENGINE COMPONENTS
Brand
Engine Serial Number
Engine Spec. Number
CLUTCH COMPONENTS
Brand
Serial Number
Assembly of Clutch
BUILT WITH QUALITY
AND DESIGN FIRST

Brush Bandit 1850 Specifications

General

Brand	Brush Bandit
Model	1850
Category	Chipper
Language	English

Summary

Safety Procedures

Machine Operation Safety

General safety guidelines, warnings, and hazard identification for machine operation.

Specific Safety Procedures

Detailed safety rules for operation, maintenance, and specific components.

Slope Operation Safety

Safety precautions for operating the machine on inclines.

Equipment Specifications

Autofeed Options

Autofeed System Overview

Explains the functionality and components of the autofeed system.

Controls

Feed Control Handle Operation

Explains how to operate the feed control bar for pulling material into the chipper.

Cab Control Layout and Operation

Identifies cab controls and their functions.

Loader and Winch Control Procedures

Engine and Chipper Hood Controls

Transportation Procedures

General Machine Transportation

Maintenance Section

Daily Start Up & Maintenance

Routine checks before operating the machine.

Maintenance Schedules and Checklists

Key Component Maintenance Procedures

System Maintenance and Care

Hydraulic Section

Bandit Hydraulic System Overview

Explains the hydraulic system's design and care.

Hydraulic Pressure and Component Procedures

Covers pressure adjustments, checks, and troubleshooting for hydraulic components.

Hydraulic Troubleshooting Guide

Lists common hydraulic problems and their solutions.

Hydraulic Component Identification

Chipper Section

Chipper Knife Grinding and Filing

Chipper Knife Changing Procedure

Lubrication & Coolant

Electrical Section

Machine Harness to Valves Diagrams

Radio Remote Electrical Components

Typical Electrical Wiring Diagrams

Replacement Parts Section

Infeed Hopper Components

Chipper Components

Hydraulic Components

Loader Components

Remote Control Components

Cab Components