To Next PageTo Next Page
Need help?Do you have a question about the Brush Bandit 65XL and is the answer not in the manual?
Defines signal words like DANGER, WARNING, CAUTION, NOTICE for safety procedures.
Covers essential safety practices, PPE, and machine condition checks.
Details safe operating angles for ascending, descending, and side slopes to prevent accidents.
Lists possible causes and solutions for feedwheels not stopping or not re-engaging.
Lists essential steps to complete before transporting the machine to ensure safety and proper securing.
Provides a daily checklist of checks and maintenance tasks to ensure proper machine operation.
Provides step-by-step instructions for adjusting belt tension on drive and pump belts for optimal performance.
Details the safe procedure for clearing obstructions or plugs from the chipper disc/drum.
Specifies recommended hydraulic fluids, viscosity, and operating temperature ranges for the system.
Provides essential rules for maintaining the hydraulic system to ensure longevity and prevent damage.
Troubleshoots common problems with feedwheels turning slowly, not at all, or not chipping wood properly.
Lists common chipper issues like poor chip quality, anvil contact, discharge plugging, and hot bearings.
Provides guidance on proper knife sharpening, angles, and replacement to maintain chipper performance.
Details the step-by-step process for safely changing chipper knives, including safety precautions.
Outlines daily, weekly, monthly, and yearly lubrication requirements for various machine components.
General| Horsepower | 89 to 120 hp |
|---|---|
| Chipping Capacity | 6 inches |
| Weight | 6, 900 lbs (approximate) |
| Chipper Capacity | 6 inches |
| Feed Type | Hydraulic |
| Tire Size | 205/75R15 |
