Bryant 313JAV PLUS 80X User Manual

1
Product Data
313AAV/JAV Plus 80x
4--WAY MULTIPOISE
INDUCED--COMBUSTION GAS FURNACE
INPUT CAPACITIES: 45,000 THRU 135,000 Btuh
A08288
THE BRYANT Plus 80x GAS FURNACE
The Plus 80x Deluxe 4--Way Multipoise Gas Furnace offers
outstanding features in an 80% AFUE furnace.
Deluxe features include: an ECM motor which enhances SEER
performance up to 1.5 points*, a third fan relay for discrete
continuous fan speed, the ability to change continuous fan speeds
from the thermostat (Fan on Plust), dehumidify mode, standard
Media Filter Cabinet, fault code storage, and more. The Plus 80x
is very quiet thanks to a new combustion design that eliminates
noise, rather than just muffle or box it in. Applications are easy
with 4 --way multipoise design, through-- the--furnace downflow
venting, 13 different venting options, and a door designed for easy
service access. An inner blower door is provided for tighter sealing
in sensitive applications. The 313AAV/JAV is approved for use in
Low NOx Air Quality Management Districts.
*as compared to the Air Conditioning Heating and Refrigeration
Institute’s standard coil--only ratings when paired with selected
Bryant evaporator coils.
STANDARD FEATURES
S ECM blower motor included
S Noise elimination combustion system
S SmartEvapt can lower the humidity level in the home by
nearly 10%
S Four-- position furnace: Upflow, Horizontal Right,
Horizontal Left, Downflow
Thirteen different vent options
S Compact design only 33--1/3 in. (847 mm) tall
S High-- Efficiency Media Filtration Cabinet included
S Washable filter included
S Micropr ocessor based “smart” control center
“Fan on Plus
t “--Continuous Fan speed adjustable from
thermostat
Adjustable heating air temperature rise
Dehumidify mode
LED diagnostics, non--volatile fault code memory, and self--test
feature
On--board fuse for transformer protection
S Patented blocked vent safeguard to ensure proper furnace
venting
S Insulated blower compartment
S HYBRID HEAT® Dual Fuel System compatible
S All models are chimney friendly when used with accessory
vent kit
S Perfect Lightt Igniter
S Residential installations eligible for consumer financing
through the Comfort Credit Program
LIMITED WARRANTY
S 20 -- year warranty on Super St heat exchanger
S 5 -- year parts warranty on all other components

Bryant 313JAV PLUS 80X Specifications

General

Brand	Bryant
Model	313JAV PLUS 80X
Category	Furnace
Language	English

Summary

Product Data

Standard Features

Lists key features of the 80% AFUE gas furnace, including ECM motor, SmartEvap, and multipoise design.

Limited Warranty

Details the warranty coverage for the heat exchanger and other components.

Bryant Accessories

Controls, Thermostats and Zoning

Information on programmable and non-programmable thermostats and zoning systems.

Mechanical or Electronic Air Cleaner

Description of air cleaners for removing smoke, dirt, and pollen from the air.

Humidifier

Details on how humidifiers improve comfort by adding moisture to dry air.

Physical Data

Blower Performance Data

Venting Notes

Air Delivery CFM

Electrical Data

Dimensions

Installation

Minimum Clearances to Combustible Construction

Specifies required minimum clearances for safe installation near combustible materials.

Typical Wiring Schematic

Typical Installation

Guide Specifications

General

Provides general information including system description, quality assurance, and warranty.

Products

Details the components included, such as blower motor, filters, and equipment.

Casing

Specifies the material and finish of the furnace casing.

Inducer Motor

Describes the inducer motor and its mounting for vibration reduction.

Draft Safeguard Switch

Highlights the function of the draft safeguard switch for vent safety.

Heat Exchangers

Details the design and material of the heat exchangers.

Controls

Describes the microprocessor-based control board and its features.

Operating Characteristics

Lists key operating characteristics like heating capacity and AFUE.

Electrical Requirements

Specifies the electrical supply voltage, phase, and fuse/breaker requirements.

Dimensions

Provides overall dimensions for the furnace unit.

Special Features

Refers to specific product data for available enhancements and features.