Bryant 369AAN - User Manual

To Next Page

NOTE: Read the entire instruction manual before starting the

installation.

This symbol → indicates a change since last issue.

TABLE OF CONTENTS

SAFETY CONSIDERATIONS.....................................................1

INTRODUCTION..........................................................................2

LOCATION....................................................................................3

General ......................................................................................3

Location Relative to Cooling Equipment ................................3

INSTALLATION...........................................................................3

Air for Combustion and Ventilation ........................................3

General ......................................................................................4

Unconfined Space.....................................................................4

Confined Space.........................................................................4

All Air from Inside the Structure .......................................4

All Air from Outside of Structure ......................................4

Duct Work Recommendations ............................................5

Venting.................................................................................5

Oil Burner............................................................................6

Oil Connections...................................................................6

Barometric Draft Control ....................................................6

Electrical Connections.........................................................6

Horizontal or Downflow Installation..................................6

Filters ...................................................................................7

START-UP, ADJUSTMENT, AND SAFETY CHECKOUT......7

Operational Checkout ...............................................................7

Combustion Check....................................................................7

Fan Adjustment Check ...........................................................10

Limit Control Check...............................................................10

For Year-Round Air Conditioning.........................................10

Heating ....................................................................................10

Cooling....................................................................................10

Constant Blower Switch.........................................................10

MAINTENANCE.........................................................................10

General ....................................................................................10

Oil Burner ...............................................................................11

Heat Exchanger and Flue Pipe...............................................11

Blower Removal .....................................................................11

SAFETY CONSIDERATIONS

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER

FLAMMABLE VAPORS AND LIQUIDS IN THE VI-

CINITY OF THIS OR ANY OTHER APPLIANCE.

DO NOT ATTEMPT TO START THE BURNER

WHEN EXCESS OIL HAS ACCUMULATED, WHEN

THE FURNACE IS FULL OF VAPOR, OR WHEN

THE COMBUSTION CHAMBER IS VERY HOT.

WARNING: For use with grade 1 or 2 Fuel Oil. Do not

use Gasoline, Crankcase Oil, or any Oil containing

Gasoline! Failure to follow this warning could lead to

sooting, fire, explosion, and/or severe bodily harm.

CAUTION: Never burn garbage or paper in the heating

system and never leave rags, paper, or any flammable

items around the unit. Failure to follow this caution will

result in minor unit or property damage.

CAUTION: These instructions are intended to be used

by qualified personnel who have been trained in installing

this type of furnace. Installation of this furnace by an

unqualified person may lead to equipment damage and/or

a hazardous condition which may lead to bodily harm.

All local and national code requirements governing installation of

oil burning equipment, wiring, and flue connections must be

followed. Some of the codes (issued by the Canadian Standards

Association, the National Fire Protection Agency, and/or the

American National Standards Institute) that may be applicable are:

Fig. 1—369AAN Multipoise Oil Furnace

A97247

Installation, Start-up,

and Operating Instructions

MULTIPOISE

OIL FURNACE

Cancels: II 369A-105-4 II 369A-105-5

11-03

369AAN

Series C

—1—

Other manuals for Bryant 369AAN

Product Data8 pages

User's Information Manual8 pages

Need help?

Do you have a question about the Bryant 369AAN and is the answer not in the manual?

Summary

General Safety Precautions

Flammable Liquids & Hot Chamber Warnings

Warnings against flammable liquids, hot combustion chambers, and unqualified personnel.

Code Compliance & Safety Symbol Awareness

Adherence to codes and understanding the safety alert symbol for preventing injury.

Introduction and Specifications

Furnace Model Overview

Introduction to the 369AAN multipoise oil furnace, its sizes, and heat/airflow combinations.

Dimensional Data and Unit Sizing

Diagram and table detailing furnace dimensions for different unit sizes.

Location and Air Requirements

Furnace Placement and Safety

Guidelines for furnace location, protection from water, and avoiding construction heater use.

Integration with Cooling Systems

Recommendations for installing furnace with cooling coils in series or parallel airflow.

Combustion and Ventilation Air Needs

Requirements for air supply based on unconfined or confined space installation.

Installation - Duct Work and Venting

Duct Work Recommendations

Guidelines for proper sizing, installation, and sealing of supply and return air ductwork.

Venting System Requirements

Instructions for connecting the furnace to a safe venting system, including inspection.

Start-Up and Operational Checks

Operational Checkout Procedure

Pre-start checklist ensuring all components and connections are correct before operation.

Combustion and Burner Setup

Steps for setting up the oil burner, checking combustion, and ensuring optimal performance.

Adjustment and Blower Settings

Fan Adjustment and Limit Control Checks

Adjusting blower speed for airflow and checking limit controls for safe operation.

Year-Round AC and Blower Operation Modes

Configuration for year-round AC, heating, cooling, and constant blower switch operation.

Maintenance Procedures

General Annual Servicing Requirements

Requirement for annual servicing including nozzle, burner, and heat exchanger checks.

Oil Burner and Heat Exchanger Care

Procedure for oil burner nozzle replacement and cleaning of heat exchanger and flue pipe.

Blower Assembly Servicing Procedures

Instructions for safe removal and reinstallation of the blower assembly.