Bryant 619PHA Series User Manual

SM619PHA-03 Specifications subject to change without notice. 35
P2 (High temperature protection of IPM module diagnosis and solution)
Description: If the temperature of IPM module is higher than limited value, the LED displays this failure code.
Recommended parts to prepare:
• Faulty PCB
• Connection problems
Troubleshooting and Repair:
Check the fastening screws on the
PCB and IPM radiator.
Are they
fixed tightly?
Replace the outdoor
control PCB.
Tighten the screws and apply
silicon grease.
NO
YES

Bryant 619PHA Series Specifications

General

Brand	Bryant
Model	619PHA Series
Category	Air Handlers
Language	English