To Next PageTo Next Page
Need help?Do you have a question about the Bryant LEGACY 582K and is the answer not in the manual?
General| Blower Motor Type | ECM |
|---|---|
| Motor Type | ECM |
| Cabinet | Galvanized steel |
| Refrigerant | R-410A |
| Voltage | 208/230 V |
| Frequency | 60 Hz |
| Coil Type | Aluminum / Copper |
Direct drive fan system with Vane Axial design and ECM motors for energy efficiency.
Bryant controllers integrate Legacy™ Line rooftops with building automation systems.
Units meet ASHRAE 90.1-2016 & IECC minimum efficiency requirements.
All 3 to 6 ton units are field convertible to horizontal airflow for job site flexibility.
Patented Perfect Humidity™ system provides reliable dehumidification for part load requirements.
Breakdown of the 582K model number structure and options.
Breakdown of the 559K model number structure and options.
AHRI ratings for 582K series units including SEER, EER, and IEER.
AHRI ratings for 559K series units including SEER, EER, and IEER.
Physical specifications for 3-4 ton units including coils and fans.
Physical specifications for 5-6 ton units including coils and fans.
Gas heat data for 1-phase units, covering various stages and fuel types.
Gas heat data for 3-phase units, covering various stages and fuel types.
Details options installed at the factory for enhanced functionality.
Lists and describes accessories that can be installed in the field.
Dimensional drawings and specifications for 582K models.
Dimensional drawings and specifications for 559K models.
Detailed dimensions for roof curb accessories.
Tables showing cooling capacities under various ambient conditions.
Cooling performance data for units with the Perfect Humidity system.
Static pressure deductions for gas heating calculations.
Graphs showing pressure drops for economizer components.
Important notes and guidelines for understanding fan performance data.
Fan performance tables for 582K series units.
Fan performance tables for 559K series units.
Electrical data for compressor, OFM, IFM, and power exhaust for cooling mode.
Minimum Circuit Ampacity and Maximum Overcurrent Protection data.
Electrical data for electric heater options.
Diagrams showing electrical connections for unit controls and economizers.
Diagrams illustrating the main power connections for the units.
Operation sequence for cooling modes (single and two-stage).
Operational sequence for gas and electric heating.
Operational sequence for units with factory-installed economizers.
Explains the multiple modes of dehumidification.
Schedules for decentralized HVAC equipment and unit configurations.
Specifications for unit cabinet materials, finish, and construction.
Details on gas heat exchanger, burners, and ignition system construction.
Specifications for evaporator and condenser coil materials and construction.
Details on economizers, controls, and other optional features.
