Manual EVoBASIC v.7 53 / 80
3.2.3- ADVANCED kit (ORP) (OPTIONAL)
The equipment continuously measures the bactericide level of water
through this probe, by means of an "ORP" probe. Simply adjust the
required level and the equipment automatically maintains the level of
disinfection by adjusting the production of chlorine to the real needs of
the swimming pool.
The screen shows the "Redox" level (bactericide capacity) present in the
swimming pool.
The ORP (Oxidation Reduction Potential) is the electrical voltage that
indicates the oxidation capacity or reduction of a solution. In swimming
pools, the oxidation capacity is directly related to the bactericide power
of the water, which is directly related to the concentration of free
chlorine in the pool.
This probe enables you to adjust the equipment in AUTOMATIC
operating mode.
3.2.3.1- Parts
1-REDOX Probe
2-Probe-Holder
3-Flange
4- Reference liquid 465mV.
3.2.4- PRO/2 kit (free chlorine) Optional in EVO equipment
The amperometric measurement kit, allows to obtain a ppm free chlorine
Reading from your swimming pool. This sensor is swimming a 3-
electrode header, which is separated from the water through a
membrane. This ppm measure has a low dependency of pH and
isocyanuric acid, and it can be also installed in sea water wimming
pools (this option to be asked to BSV Electronic). Please follow carefully
the installation, calibration and maintenance instructions to ensure a
perfect setup of the kit.
To Next Page
Loading...